PDA

View Full Version : First time glassin' = kick panels



mrteacha
08-04-2009, 02:00 PM
So i decided to try my luck in constructing some kicks. I ended getting the bondo brand jelly resin by accident. Ended up doing one coat on the outside and one coat on the inside. knocked it down with some 40 grit. threw some dynagold kocked it down with 120 grit. I primed it to be easier to see where I needed the filler then hit it with 320 gritand primed again. Going to coat it with some SEm textured paint and then with their light gray to match my interior.
http://i516.photobucket.com/albums/u326/poppaofthree/HPIM2125.jpg
http://i516.photobucket.com/albums/u326/poppaofthree/HPIM2128.jpg

http://i516.photobucket.com/albums/u326/poppaofthree/HPIM2131.jpg
http://i516.photobucket.com/albums/u326/poppaofthree/HPIM2130.jpg

http://i516.photobucket.com/albums/u326/poppaofthree/HPIM2135.jpg

jmanpc
08-04-2009, 02:05 PM
Not too shabby.

ricoshay
08-04-2009, 02:08 PM
recoverred from impending failure nicely

ngsm13
08-04-2009, 02:09 PM
Cool.

nG

tez4life
08-04-2009, 02:09 PM
Nice

jmanpc
08-04-2009, 02:17 PM
Hey wait a minute, you switched from drivers' to passengers' side.

I see what you did there.

http://i627.photobucket.com/albums/tt356/duncan1089/see-what-you-did-there-scaled.jpg

Jared530
08-04-2009, 02:18 PM
http://i627.photobucket.com/albums/tt356/duncan1089/see-what-you-did-there-scaled.jpg[/QUOTE]

hahahhaa

audioarsonal
08-04-2009, 02:19 PM
Yeah he fuked up with the first one using jelly and did the other one and tryed to pass it off as a recovery.

You sly dog you..........

mrteacha
08-04-2009, 05:37 PM
haahaa no, NOT trying to deceive you guys.. both driver and pass. side were done the same way but pics of the steps on the pass side didnt show up on memory card. so I used pics of process from both driver and pass side....

Jared530
08-05-2009, 12:29 AM
lets see it installed in your whip