PDA

View Full Version : alpine pdx 5 tuning.



von
08-02-2009, 10:17 PM
I just had an alpine pdx 5 installed in my 00 blazer, specs are 75x4, and the actual is 110 watts. and the mono channel spec of 300 x 1 has an actual of 422 watts. I have a pair of alpine spr 17s in front, and alpines spr 69c at the rear seat panels. 2 x 12 subs at rear. I would like some advise as to a good crossover setting for both the spr17 s, and the spr69c hp for the front I know need the freq setting, as for the 69c should they be set to, hp or should they be left off for full range. and I need the optimum hz setting. thanks.

SSon22s
08-03-2009, 04:45 PM
Well see where they respond without distorting..I run most of my stuff on full range or turn on the HP filter at about 50hz, but I also dont beat the snot out of my interior speakers, you can tell when they cant handle it by your ear...

von
08-03-2009, 06:24 PM
Should I use hp and lp on amp,or the head unit?

eharri3
08-04-2009, 06:34 PM
Try both. If the head unit's pre-set crossover points don't put you in your sweet spot the amp dials will give you more precise control to help you find it.