View Full Version : Anyone good with screwed-up under seat designs?
08-02-2009, 10:49 AM
I have an 08 Titan CC and am planning on putting a 1508 under the rear seat wuth around 500 watts on it. Anyone good at designing a box like that? Vivteet is going to build it, just need an idea. I can get measurements if needed.
08-02-2009, 12:01 PM
08-02-2009, 12:26 PM
i did one in may under a chevy back seat. not much room under that truck, so the box ended up at .8 cubes tuned to 38hz. a little short of the 1 cube i wanted. it still pounded BTW.
08-02-2009, 02:16 PM
slopes upwards towards front of seat
this allows around .75 before displacement. If I need a little more we can go over the hump which will have the same dimensions less 3 inches on the height across the slope. With the 9 inches for h1 I could come close to having the sub fire forward which would be great as I would not have to worry about firing into the bottom of the seat.
Nut Hair Trick
08-02-2009, 02:19 PM
I designed and built this one for under the back seat of my F150 for (2) 1508s.
08-02-2009, 02:23 PM
I can go all the way across if needed, could probably pull out 1.6cf orclose that way.
08-02-2009, 02:33 PM
Very nice looking setup!