PDA

View Full Version : need box designs



SWFL
08-01-2009, 01:07 AM
I am looking for a few designs from diff people to see what options there is and the best way to go. I am running 4 15's AA chaos on 4k watts daily. No meter just want daily loud low ground pounding setup. I like how a box performs thats tuned in the mid to low 30's.

These are my max dimensions external and will use either double 3/4mdf or 1" mdf singled with lots of bracing. This will be a blowthrough BTW.

my max dimensions external, 20" high x 48" wide x 55-57" long.

I will pay you for your build if i go with it. I will have a build log so you will see the box built and know i used your design:D

Thanks

Twank06"GTO'
08-01-2009, 01:36 AM
hit up iamamp3pimp for a ****** design

SWFL
08-01-2009, 02:55 AM
http://i30.tinypic.com/1zdy88z.jpg

what bout something like that?

dappa5
08-01-2009, 09:38 AM
ok thats a design now build it
http://www.caraudio.com/forum/showthread.php?t=387921
look @ his he has some nice ideas

dappa5
08-01-2009, 09:45 AM
whoops i see you were there already lol

SWFL
08-01-2009, 07:01 PM
yea PWK designs his boxes

anyone have input on PWK designs?

SWFL
08-02-2009, 12:48 AM
bump

SWFL
08-02-2009, 04:56 PM
bump

galacticmonkey
08-02-2009, 05:25 PM
Dont go with PWK. I got your PM, Ill look at it later.

I still say a bandpass is your best bet. Id go 6th order if you can.

SWFL
08-02-2009, 06:05 PM
I dobut i have the room for a 6th order. barely enough for a 4th order prob

TnT_Sounds
08-02-2009, 06:40 PM
nothing wrong with PWK

galacticmonkey
08-02-2009, 08:53 PM
Bring it to KOB Kustomz and have Frankie build you the box.

dappa5
08-02-2009, 09:15 PM
Na g-monk. He can do it himself. Lol. My price was to high so i guess he's gona do it himself

TnT_Sounds
08-02-2009, 09:18 PM
What were you gonna charge?

dappa5
08-02-2009, 09:23 PM
700 for the box (finnished paint/carpet) blow thru(accordian boot/sealant) amp racks and entire install etc... but then again i wanted $30 to throw in his alt so i think thats what skered him off lol nah he needs to do it him self it will be great experience for him

TnT_Sounds
08-02-2009, 09:32 PM
That's a deal man. About what you would spend in materials alone to do it right. Do you know the guy personaly?

He seems a little wishy washy if you ask me. I charged a guy 50$ to put his alt in an eclipse. So that's a good deal too. Personaly if I was that guy, I would pay you to do it. I would hate to see something get F'd for a first timer with really no knowledge.

dappa5
08-02-2009, 09:35 PM
nah i have a shop @ my disposal so only real matterial would be wood and the boot (which i have ) so figured it was a good price?? idk

TnT_Sounds
08-02-2009, 09:38 PM
That's probably the best price I've seen quoted.

I know a guy was gonna have a shop just build a box and cut the hole and they were gonna charge 1200

dappa5
08-02-2009, 09:41 PM
i kno i just charged $750 4 a 4th order but that guy wasn't a do it your selfer lol

TnT_Sounds
08-02-2009, 09:41 PM
I normaly charge 300 just to cut the hole and seal it with the boot. Maybe a little less depending on how big.

I like to brace the entire back wall though before putting the boot on. I shouldve told KHARPS to do that but it slipped my mind. Now he has a window that's gonna cost 200$ to fix.

dappa5
08-02-2009, 09:48 PM
yeah this kids truck is a king ranch f 150 so not too to hard plus i had the boot from other job so $200 for blow thru $500 for rest i was bored and wanted to build something lol prob should have charged $900-1000 ah well

TnT_Sounds
08-02-2009, 09:53 PM
There needs to be more people in my area wanting blow-throughs. I may have one to do next month. But I stress it a lot that if they are willing to cut up their truck they should just go all out big.

SWFL
08-02-2009, 10:12 PM
the materials for the box are around 200, so another 300 dollars i can save and do it myself i do have experience i have built my own boxes before. I aint a noob what you guys think i am. I just am getting him to do the cutout for the blowthrough and the boot. I want to build the box myself its not that difficult i have a table saw and all the equipment needed.

TnT_Sounds
08-02-2009, 10:20 PM
I know fords have the back wall in 2 layers on the cab part. When you cut try to cut a piece of MDF to fit in there and bolt it to the cab. Then foam the entire back wall. Should solid up the whole thing pretty well.

dappa5
08-03-2009, 10:40 AM
Was not trying to call you a noob/ just trying to illustrate the deal i WAS giving that's all. G/L with the build. Can't wait to see the build log.