PDA

View Full Version : Help with Fi ported box



Carnivorous18
07-29-2009, 05:35 AM
Max dimensions: depth 1: 38" depth 2: 30" width: 35" height: 17" . This is what im using in the the12volt.com calculator for a "wedge enclosure 2", except what i consider the depth and height are switched on the calculator. I want to face the box so the "height 1" face is on the bottom and the "depth" face is facing towards the trunk (back). Basically flipping the box counter clockwise, and placing the sub(s) in the face that you see when you open the trunk.
http://www.the12volt.com/12voltimages/wedwdh2_.gif<flip that counterclockwise to understand what i want

The calculator says with those max dimensions I listed I get 9.76ft^3. If thats true, I want to fit either 2 12", 2 15", or 1 18" btl in it. Im thinking the 1 18" would be the cheapest and most ideal, but im not for certain that I can fit 1 18" in that max space. :confused: Please any1 that can help me with a box design ported and tuned at 35 would be supremely appreciated.

WOT
07-29-2009, 06:24 AM
There are free designs in the stickys

dappa5
07-29-2009, 09:35 AM
if you can't find one of those that will work or you need cut sheets and assembly instructions hit me up