PDA

View Full Version : port placement.



atlninja82
07-28-2009, 10:16 PM
hey guys,

i have a single cab chevy and i am building a new box for two ported dd 1510's. im going to be using a 4 inch aero port and i need to know which would be loudest. on the sides, front (towards the seats), or up towards the ceiling.

also are the box requirements for the 1510 the same as the new t1510? also what do these like to be tuned at looking for a mix of sq and audible loudness.

thanks

atlninja82
07-28-2009, 11:53 PM
no one?

pokey_159
07-29-2009, 12:21 AM
basic rule on trunk box's are subs toward the frount and ports up

WOT
07-29-2009, 05:27 AM
basic rule on trunk box's are subs toward the frount and ports up

Are you stupid? No its not, thats almost the worst in most cases. If your seats fold down, point everything to the front and seal off the trunk, if youre not gonna seal it, face everything to the back

ps - a 4" aero probably isnt enough port for 2 10's

dappa5
07-29-2009, 08:31 AM
hey guys,

i have a single cab chevy and i am building a new box for two ported dd 1510's. im going to be using a 4 inch aero port and i need to know which would be loudest. on the sides, front (towards the seats), or up towards the ceiling.

also are the box requirements for the 1510 the same as the new t1510? also what do these like to be tuned at looking for a mix of sq and audible loudness.

thanks



HE SAID TRUCKNOT TRUNK

dappa5
07-29-2009, 08:32 AM
single cab chevy
subs foward port up
oh wait tou already have my vote lol

bwoodroof
07-29-2009, 08:34 AM
Sub forward port to passenger side. If possible mount the aero inside the box firing outward.

dappa5
07-29-2009, 08:52 AM
directly in to back of seat in a 1993 chevy single cab bench seat ???

dappa5
07-29-2009, 08:55 AM
in both of my trucks of that style (1988-1998) i avoided porting directly into that block of faom they call a seat one i ported up (enjoyed ) and the other i ported under the seat (bout 5.25 inches under there (Didn't mind but liked up better)

bwoodroof
07-29-2009, 09:04 AM
i thought he wanted more spl output. sub forward port side is gonna be louder than sub forward port up.

dappa5
07-29-2009, 09:12 AM
sq spl balance
so out put lost into seat is equal with slightly less out put up