Porting a sealed box?

[Jimmaaay]

I was wondering if there was anything I could do to port or give it vents. I heard you could drill large hole to the right diameter on the side or top of the box to create a vent? Will this work?


Thanks, Jimmy

[aaronrchr]

absolutely.........

[Jimmaaay]

Was this sarcastic?

[john denver]

dont drill holes in your box

[ace_800]

Not at all....

[KyleBechtold]

you can.. it won't sound right.. it will be tuned weird as ****

[Jimmaaay]

Is there any way to create a vent or something?

[KyleBechtold]

the best way to port a box is don't use glue or silicone and let the air seep out.. it sounds much better

[KyleBechtold]

Is there any way to create a vent or something?

aero ports if you already built the box.. its all dependent though

[john denver]

just start with a new box, Or you might be able to add an external port

[Jimmaaay]

How do you do an aero port?

[Mr. Slate]

You have to buy it first.

[aaronrchr]

You have to buy it first.

nah man toilet paper roll

[pawn man]

if it is a small sealed box, you probably will not be able to port it. a vented box is almost always larger than sealed for most speakers. if it is a large sealed then yes.

[Mr. Slate]

True.

[theMessenjah44]

the best way to port a box is don't use glue or silicone and let the air seep out.. it sounds much better

This


You'll have air movin all over in yo ride!

[zack1442]

depending on size of subs and box, id say if u had 2 12s ina sealed box.the only way its gonna get louder with ports..is if u make that entire sealed box into one box for one of the 12s and port it....its just to small for 2 subs to port most likely

[misfit138]

dont drill holes in your box

Why not?

The more holes you drill, the louder it'll get...