PDA

View Full Version : Got a 10" HD3 and 10" RD HW...box idearss?



da box king
07-26-2009, 09:58 PM
I should be gettin the 10" hw soon, gonna play with that till I recone to an 18. Sub is stock, 55mm coil, and 3 spiders.

I also have a 10" hd3 that i want to play with

I have 4-5k on tap. Give me some ideas on boxes. I will use them daily for a but I would also like to build a burp box or somethin...Hopefully do some building this week

mazda6i07
07-26-2009, 09:59 PM
1.4-1.5 cubes at 38hz = Aq Hd310
Rd im not sure

da box king
07-26-2009, 10:02 PM
1.4-1.5 cubes at 38hz = Aq Hdc310
Rd im not sure

this is an hd3 too

da box king
07-26-2009, 10:19 PM
maybe a 4th or 6th order too? idears?

dappa5
07-26-2009, 10:22 PM
that much power you should build a 6 th order hit up 80

da box king
07-26-2009, 10:25 PM
I may talk to 80....also ^ do not post yur nasty *** with those pics in my thread :)
thanks for the reply tho

mazdakid
07-26-2009, 10:44 PM
Maybe let me get the hd3 so I can make it a 12?

da box king
07-26-2009, 10:46 PM
Maybe let me get the hd3 so I can make it a 12?

I can still make it a 12;)

i just have a 10" basket for it now tho, **** lil 4 spoke

I think I need to still use it tho first

SPLluminator
07-26-2009, 10:52 PM
For spl, do an external 6" aero in a 1.25ft box. See what #'s you do with the hd3. I have no idea on the HW. I gotta figure out where to tune mine.

slam
07-26-2009, 10:53 PM
just throw in in my jeep wrangler. I already have a box for it on a 40.1

da box king
07-26-2009, 10:57 PM
just throw in in my jeep wrangler. I already have a box for it on a 40.1

care to share that box or throw some idears? you pm if youd like

da box king
07-26-2009, 10:58 PM
For spl, do an external 6" aero in a 1.25ft box. See what #'s you do with the hd3. I have no idea on the HW. I gotta figure out where to tune mine.

car peaked at 40hz in the last setup...and does best all sealed up

what do you think to tune it to for spl? 45?
wonder if i could use a 6" aero for daily

SPLluminator
07-26-2009, 11:00 PM
car peaked at 40hz in the last setup...and does best all sealed up

what do you think to tune it to for spl? 45?
wonder if i could use a 6" aero for daily

I wouldnt. Id use a 4" for daily. I happen to have an unused one if you want it. Never used.

da box king
07-26-2009, 11:02 PM
I wouldnt. Id use a 4" for daily. I happen to have an unused one if you want it. Never used.

a 6" aero?
I have two 4" sitting next me

mazdakid
07-26-2009, 11:04 PM
Let me know when you want to get rid of the aq. Its getting hard to find a match for mine.

da box king
07-26-2009, 11:06 PM
Let me know when you want to get rid of the aq. Its getting hard to find a match for mine.

I hear ya

da box king
07-26-2009, 11:40 PM
bed time bump

da box king
07-26-2009, 11:46 PM
feg

da box king
07-27-2009, 08:36 AM
up

dappa5
07-27-2009, 08:55 AM
srry bout pics last nite the moderators were f*@#ing with me
but my suggestion still stands go 6th order with that much power
do you have the space??

da box king
07-27-2009, 01:50 PM
srry bout pics last nite the moderators were f*@#ing with me
but my suggestion still stands go 6th order with that much power
do you have the space??

I would imagine I have enough space

Goin in a trailblazer. Dimensions I want to use are 36" W x 30" D x however high

dappa5
07-27-2009, 05:33 PM
deff have the space hit up 80 or one of the other B P designers and let the BOOM BOOM begin lol

SQcrewcab
07-27-2009, 05:39 PM
Steve miller told me 1.25 for higher spl and 1.5 - 1.75 for daily but NO BIGGER than 1.75 he said.

l7runner
07-27-2009, 05:47 PM
Yeah with that much power try 1.0-1.25 cubes. ~40hz

I have had iffy results with 6th orders, typically you will be just a loud with a reg. ported set up, and they're easier.

A big aero would be cool but could be very long. A single 4" should be good for daily.

I have a 10" in 1.15 @ 40ish with a 4" port...I'm just waiting to throw some real power at it. although 150ish watts is enough for everyday listening

dappa5
07-27-2009, 05:56 PM
I have had iffy results with 6th orders, typically you will be just a loud with a reg. ported set up, and they're easier.


then maybe you were not doing it right (that's what she said )

also hit up funkinmovin he has had some poutstanding results with a 6th order
housing an hdc 15 80 inches designed it

da box king
07-27-2009, 10:28 PM
Steve miller told me 1.25 for higher spl and 1.5 - 1.75 for daily but NO BIGGER than 1.75 he said.

good to hear my man...can't wait to try it out. Workin on a crx design right now...along with a 2 4" aero design for spl. and a single 4 for daily

da box king
07-27-2009, 10:31 PM
I may just try some regular ported boxes for now....but I know a 6th order would let it handle the power better.

also if I do 2 4" aero's or 1 aero for spl...do you think I could do higher tuning, like around 45 hz? or what should I tune to

dappa5
07-27-2009, 10:39 PM
SISSY
but seriously though G/L with it post pics and meter scores

da box king
07-27-2009, 10:43 PM
SISSY
but seriously though G/L with it post pics and meter scores

depending if I work tomorrow than I'll work on a box or 2

probably do external ports

btw how do you guys mount your external ports? screw from the inside or outside of box...or flange lip on outside or inside?

dappa5
07-27-2009, 10:46 PM
will this be changeable port??

dappa5
07-27-2009, 10:46 PM
i use nuts and bolts with foam tape to seal it

da box king
07-27-2009, 11:07 PM
i use nuts and bolts with foam tape to seal it

nuts and bolts, ****...its just plastic:laugh:

Ill prob just put the flange lip on the inside and use same foam tape too

dappa5
07-27-2009, 11:13 PM
nuts and bolts, ****...its just plastic:laugh:

Ill prob just put the flange lip on the inside and use same foam tape too


i put flange on inside as well but if you screw it after a couple of changes the wood will be fraged

and i'm only talking 1/4" bolts not very big

da box king
07-27-2009, 11:43 PM
i put flange on inside as well but if you screw it after a couple of changes the wood will be fraged

and i'm only talking 1/4" bolts not very big

very true..I may try that with some washers so the plastic hold up :)

Buck
07-27-2009, 11:46 PM
Try tuning the AQ to 30 hz. It's worth it. I was really surprised.

dappa5
07-27-2009, 11:59 PM
nice rising sun on your box buck
wanna build me one ??

da box king
07-28-2009, 12:01 AM
Try tuning the AQ to 30 hz. It's worth it. I was really surprised.

hmmm not sure how it would like it off the power

with my hdc3s I tuned to 35 and they liked it, just hope the hd3 suspension is better:crap:

Buck
07-28-2009, 12:06 AM
nice rising sun on your box buck
wanna build me one ??

;)


hmmm not sure how it would like it off the power

with my hdc3s I tuned to 35 and they liked it, just hope the hd3 suspension is better:crap:

Well turn the gain down some then. I have about 1500-1600w going to my hdc310a in a 1.5 cubic foot box tuned to 30hz and it plays a nice 29 hz test tone. Can't go lower than that with a test tone on full power.

l7runner
07-28-2009, 11:05 AM
For external aero's you should put the flange on the inside of the box, will make a smooth transition.

and most 6th orders made for SPL have ****** power handling out side of a specific bandwidth because the sub will unload. And that dude with the 6th order for the AQ 15" didnt even break a 140 iirc, so I wouldnt be idolizing that build.

da box king
07-28-2009, 12:22 PM
For external aero's you should put the flange on the inside of the box, will make a smooth transition.

and most 6th orders made for SPL have ****** power handling out side of a specific bandwidth because the sub will unload. And that dude with the 6th order for the AQ 15" didnt even break a 140 iirc, so I wouldnt be idolizing that build.

very nice to know....basic boxes for now...should be startin tonight

dappa5
07-28-2009, 01:07 PM
For external aero's you should put the flange on the inside of the box, will make a smooth transition.
didn't we already cover that ^^^ up there ??

iamamp3pimp
07-28-2009, 02:21 PM
what about that 6th order in the geo that did a 148.6 on 1300 watts.....

;)

iamamp3pimp
07-28-2009, 02:21 PM
and sounds good across the board