View Full Version : need a small box design... within the next hour would be great

07-20-2009, 10:20 AM
hey guys,

ive got my 2 E8s coming today. its my only day off so id like to get this box built today.

id like subs up, slot port facing back (towards the hatch) at the bottom of the box.

heres what i need
Ported Box:
1.2 ft^3 tuned to 30 Hz
F3 of 25 Hz
Depth = 4.25"
OD w/ gasket = 8 5/16"
Cut Out = 7"

.6 cubes per sub so 1.2 cubes total. the subs can be next to eachother or staggered/ off center if neccessary.

dimensions dont really matter. its a small box in the back of my jeep so itll fit regardless.

a cut sheet would be nice so i can just look at that. like i said im trying to get this done quick as its my only day off this week.

i can throw somebody a few bux via paypal if necessary after i get the plans...thanks in advance

07-20-2009, 10:21 AM
whats the sub displacement

07-20-2009, 10:33 AM
pm me desired dims
im bored I'll do it

07-20-2009, 10:55 AM
Re = 3.37 ohms (4 ohm nominal)
Fs = 34.9 hz
Qes = 0.5323
Qms = 6.93
Qts = 0.4943
Vas = 7.6 L
BL = 13.3 N/A
Mms = 127.7 grams
Cms = 162 um/N
Xmax = 12mm one-way linear (70% BL method)
Rated RMS Power = 200 watts
Depth = 4.25"
OD w/ gasket = 8 5/16"
Cut Out = 7"

thast everything straight off of woofer cookers thread.

as for dimensions. idk something like 8" high, 10" deep and whatever long if that works out.

07-20-2009, 12:39 PM
dappa clean out your PM box plz....

07-20-2009, 12:51 PM
done srry