PDA

View Full Version : HDC3 18" S10 Ext. Cab



WrenchGuy
07-18-2009, 12:30 PM
Need to come up with a box for a single HDC3 18 for SPL purposes.

NBS S-10, I was thinking sub forward passanger side Aeroports up on drivers side. I read a while back that S-10's were good this way.

Could you guys throw some ideas at me? Thanks.

WrenchGuy
07-18-2009, 12:32 PM
From what I read I might have to be in the ball park of 8"-10" aeros?

bones22
07-18-2009, 12:38 PM
sub forward port to drivers side would work fine.

personally id do downfiring. you would have to angle the sub. it may take a couple times to get it just right but would turn out really good.

WrenchGuy
07-18-2009, 12:57 PM
sub forward port to drivers side would work fine.

personally id do downfiring. you would have to angle the sub. it may take a couple times to get it just right but would turn out really good.


So ports facing the body? The angle shouldn't be prob if thats the way to go.

Some specs on max output on 2k for the S10 would be sweet. Hoping someone has this setup somewhere.

dappa5
07-18-2009, 01:56 PM
how bout this typ set up like you originaly said was in a toyota but you get the idea http://i220.photobucket.com/albums/dd289/jj53913/HPIM1119.jpg

hunterw
07-18-2009, 01:59 PM
wall or no wall? no i would do sub fwd and a slot vent firing up along the back of the enclosure

bones22
07-18-2009, 02:02 PM
So ports facing the body? The angle shouldn't be prob if thats the way to go.

Some specs on max output on 2k for the S10 would be sweet. Hoping someone has this setup somewhere.

subs/port firing toward the floor. heres one of the vehicles i ran last year. 99 club cab dakota.
http://i25.tinypic.com/x10euv.jpg
http://i31.tinypic.com/awosv5.jpg

dappa5
07-18-2009, 02:12 PM
thats pretty impressive thanx for that
I'll have to try that for a non wall application
how did it preform?

azimuth
07-18-2009, 02:14 PM
sub and port downfired, or sub and port forward.

bones22
07-18-2009, 02:15 PM
thats pretty impressive thanx for that
I'll have to try that for a non wall application
how did it preform?

i was more than happy with it.

99 dakota club cab lifted on 35's daily built for 42's to play
2 - TC9 based 15's quad 1's in 8ft3 120sq" @ 38hz
2 - Cadence ZRS10's stapped @ 2ohms
US Amps US 50 for the front doors
Stinger SP1700 under the hood
2 - Kinetik KHC2000's center console

yes the subs are ugly but they got loud
149.3 @ 44hz at the kick

WrenchGuy
07-18-2009, 03:27 PM
I like when a thread goes good. A wall is fine.

Just need to know what to put this HDC3 18 in for this application.

dappa5
07-18-2009, 03:31 PM
I like when a thread goes good. A wall is fine.

Just need to know what to put this HDC3 18 in for this application.

a BIG box:D:D

bones22
07-18-2009, 03:38 PM
I like when a thread goes good. A wall is fine.

Just need to know what to put this HDC3 18 in for this application.

5-6ft
theres no need at all for a wall unless you just want to have one.

dappa5
07-18-2009, 03:41 PM
what is recomended enclosure size?? hz??

WrenchGuy
07-18-2009, 04:34 PM
5-6ft
theres no need at all for a wall unless you just want to have one.

I'm just saying I can go either way.

WrenchGuy
07-18-2009, 04:34 PM
what is recomended enclosure size?? hz??

Looked on the site but didn't see it. May have overlooked it though.

WrenchGuy
07-19-2009, 10:54 AM
There must be more....lol