PDA

View Full Version : 4 DP21"s



rmzsuzuki89
07-17-2009, 02:14 AM
Well, I'm adding 2 more DP21"s to my Expedition in a month or two. I was planning on doing a clam wall at the B-pillars. But I also started thinking doing a diamond type enclosure would be pretty sweet too.

So I'm looking for some opinions on what you think would be louder first and foremost, and look better. Which ever design I go with will be at the B-pillars, between 35 and 40 cubes, tuned to 32hz. Please explain why you voted the way you did.

I have never done either of these designs, so any tips are also appreciated.

The subs.
http://i29.tinypic.com/al25fr.jpg

oldschool4me
07-17-2009, 02:21 AM
clam. if you do diamond the subs will fire towards one another and cause defeat.

05_ZX636
07-17-2009, 04:58 AM
are you going to run 2 3000ds on all 4

galacticmonkey
07-17-2009, 05:08 AM
clam. if you do diamond the subs will fire towards one another and cause defeat.

Some of the loudest vehicles around have diamonds.

I say go diamond, with a port in each corner on the wall firing foward. Would be sick.

SQcrewcab
07-17-2009, 05:37 AM
Some of the loudest vehicles around have diamonds.

I say go diamond, with a port in each corner on the wall firing foward. Would be sick.

And different which is always nice to see around. Clamshell would look sick though, port in the middle. Thats a hard one to choose there. If you want the diamond, i say go for it.

rmzsuzuki89
07-17-2009, 11:44 AM
are you going to run 2 3000ds on all 4

Ya, 2 3000d's strapped at one ohm.


Some of the loudest vehicles around have diamonds.

I say go diamond, with a port in each corner on the wall firing foward. Would be sick.

That's kind of what I was thinking.

audioarsonal
07-17-2009, 11:50 AM
Diamonds can be hard to load depending on how deep you go.I would do a clamshell.
I recently did one in my vehicle.Output is sick.Peakin in the low 30's and everything moves!

rmzsuzuki89
07-17-2009, 06:06 PM
Diamonds can be hard to load depending on how deep you go.I would do a clamshell.
I recently did one in my vehicle.Output is sick.Peakin in the low 30's and everything moves!

I'll probably put the top 2 subs in outside the car, then the bottom 2 in when the boxes are in the car. I'll be doing a top half and bottom half either rout I go so they fit into my car.

Xprime4
07-17-2009, 06:14 PM
either way, that will be freakin sick.

**** 40 ft/cu that's a big truck you got dude

rmzsuzuki89
07-17-2009, 06:17 PM
either way, that will be freakin sick.

**** 40 ft/cu that's a big truck you got dude

I think it'll do for a while. And with the the back two rows of seats all the way out, instead of just folded down, I will have a lot of room.

Xprime4
07-17-2009, 06:19 PM
I think it'll do for a while. And with the the back two rows of seats all the way out, instead of just folded down, I will have a lot of room.

hum.. if you want a another seat row... just put it inside the box with a port big enough to act like a door frame :crazy:

that would be original :D

jonathan demuth
07-17-2009, 06:22 PM
clam. if you do diamond the subs will fire towards one another and cause defeat.

:laugh: what? LOL LOL LOL LOL cancellation you mean?

rmzsuzuki89
07-17-2009, 06:22 PM
hum.. if you want a another seat row... just put it inside the box with a port big enough to act like a door frame :crazy:

that would be original :D

Haha that would be a crappy ride for the one unfortunate enough to be in there. I have had to store a couple suitcases in my port when I picked someone up from the airport.:laugh:

galacticmonkey
07-17-2009, 06:26 PM
I would say just build a box square shell, build each box seperately, load the sub in each. Then put each one into the shell. Bottom ones first, then load the top ones on top of that. Bolt and screw each box together and to the shell. Would be sick, and probably not too hard to do.

rmzsuzuki89
07-17-2009, 06:41 PM
I would say just build a box square shell, build each box seperately, load the sub in each. Then put each one into the shell. Bottom ones first, then load the top ones on top of that. Bolt and screw each box together and to the shell. Would be sick, and probably not too hard to do.

May do something like this.

TreyE
07-17-2009, 06:45 PM
i wanna hear :)

rmzsuzuki89
07-19-2009, 08:49 PM
By the way, this is gonna be more of a demo vehicle, not really gonna compete too much. Will be tuned between 30 and 32 hz.

fearof85
07-19-2009, 10:58 PM
I say go diamond and three 10'' aero ports on each side, would act like a 6th order and drop like a mother.


Drew

fearof85
07-19-2009, 11:02 PM
Or diamond with the diamond sealed off with plexiglass making it a 4th order. Either way go diamond.

kmanian
07-19-2009, 11:04 PM
clam. if you do diamond the subs will fire towards one another and cause defeat.


I disagree wit you here

rmzsuzuki89
07-20-2009, 12:40 AM
I say go diamond and three 10'' aero ports on each side, would act like a 6th order and drop like a mother.


Drew

I've never even thought of using aero's in this build. Thanks for giving me the idea. Maybe like 3 8" aero's in each corner.

IMOVeCHICKENS!
07-20-2009, 12:45 AM
deff do this man im on your area and i would be stoked to see something this crazy

i saw 2 21 DPs walled in a crown vic and it was insane i want to see this at a show when its done

oh and do the diamond

rmzsuzuki89
07-20-2009, 01:17 AM
deff do this man im on your area and i would be stoked to see something this crazy

i saw 2 21 DPs walled in a crown vic and it was insane i want to see this at a show when its done

oh and do the diamond

Were you at the show in Seffner today. I was standing by the Crown Vic with the 21" probably 90% of the time I was there. I had the white tank top on with black Adidas gym shorts with 3 vertical white stripes...Specific aren't I.:laugh: