PDA

View Full Version : Oklahoma G2G



jowens500
07-12-2009, 04:43 PM
When: Saturday, August 1st
Where: Advantage Audio 1815 W Lindsey St. Norman, OK 73069
Time: 10am to 4pm "officially" but until we get tired of each other in reality
What: A NONCOMPETITIVE friendly get together for a day of food/fun/prizes.

Here is a link to the original post: http://www.diymobileaudio.com/forum/12-volt-events/59870-oklahoma-dfw-g2g.html
It has all the info you will need/want to know there.

Hope to see some of you there:D!

hrtbrk1
07-13-2009, 03:08 PM
oh sweet...thats close

jowens500
07-13-2009, 09:32 PM
oh sweet...thats close

So that means your coming then, right? This is going to be one you don't want to miss!:veryhapp:

hrtbrk1
07-14-2009, 07:04 PM
depends...theres a usac event in noble same day

hrtbrk1
07-14-2009, 07:05 PM
oh nvm...the one in noble is the following week...whats so cool about this one?

ThatChevyGuy
07-14-2009, 07:07 PM
a little far for me, well see. There is another show local to me i am attending probably.

hrtbrk1
07-14-2009, 07:13 PM
read up on this on the diy....seems interesting :)

jowens500
07-14-2009, 07:30 PM
This is a NONCOMPETITIVE show, so by all means if there is a points show near you go to it for sure. But if you have nothing else going on that weekend it will be worth the effort to show up.

Like hrtbrk1 said, all the info you need is at this link:http://www.diymobileaudio.com/forum/12-volt-events/59870-oklahoma-dfw-g2g.html

There will be freebies and a huge raffle with the chance to win some sweet stuff!
For example:
Hertz HSK163.3
http://inlinethumb35.webshots.com/42274/2666900200102466812S600x600Q85.jpg (http://rides.webshots.com/photo/2666900200102466812rdPvlX)

Hertz EP4
http://inlinethumb10.webshots.com/45769/2081308620102466812S600x600Q85.jpg (http://good-times.webshots.com/photo/2081308620102466812XiIZvW)

Zapco RB-15.2
http://inlinethumb33.webshots.com/45408/2502477970102466812S600x600Q85.jpg (http://good-times.webshots.com/photo/2502477970102466812OZVGEK)

Zapco RH-15.2
http://inlinethumb41.webshots.com/40552/2393068590102466812S600x600Q85.jpg (http://good-times.webshots.com/photo/2393068590102466812DmhaDI)

Plus there will manufacture support there and maybe the Monster Girls???

hrtbrk1
07-14-2009, 07:37 PM
oooh...man i can sure use that rta...my system is so out of whack setting wise...i need to tune it

jowens500
07-14-2009, 08:18 PM
oooh...man i can sure use that rta...my system is so out of whack setting wise...i need to tune it

I hope to have more than one there.

I posted some new stuff and some pics to the post above yours.

hrtbrk1
07-14-2009, 08:21 PM
that be sweet if i won

jowens500
07-14-2009, 08:24 PM
There are some other things we are working on getting also, but nothing confirmed yet, so keep your eyes posted for more updates! One in particular I know you guys will like;).

hrtbrk1
07-14-2009, 08:25 PM
what else yall lookin for?

jowens500
07-14-2009, 08:29 PM
Well, I've been talking with the guys from DD and they are interested in getting on board with something. I've asked for a woofer of some kind? Also been in talks with Pioneer/Kenwood/Eclipse for a radio or two and Hooker Audio is going to kick in some install products too, but IDK what yet.

So, Like I said, It WILL BE WORTH THE EFFORT to show up for this event!!

And if anyone is local and would like to help out getting the shop ready, we will be working on it this Saturday and could definitely need some help. Mainly we need to do some general outdoor maintenance. If you would like to help, just show up:).

Andrizzle
07-14-2009, 08:31 PM
I may have to check this out, tho my CA vehicle is out of commision, I may still come down to hear some beats.

mokedaddy
07-14-2009, 08:31 PM
I sure could use the rta as well. Just not sure if I will be able to make it though. :crap:

hrtbrk1
07-14-2009, 08:33 PM
sure ill help man...:) aint got nothin else better to do...

hrtbrk1
07-14-2009, 08:33 PM
can also help on friday at noon.

jowens500
07-14-2009, 08:36 PM
sure ill help man...:) aint got nothin else better to do...


can also help on friday at noon.

Man that would be AWESOME!! It's not a lot of work, but every person that can help makes it that much easier.

Andrizzle
07-14-2009, 08:38 PM
Eman is your nightshade bumping? I want to hear it if I go down.

hrtbrk1
07-14-2009, 08:38 PM
Eman is your nightshade bumping? I want to hear it if I go down.

ygpm

hrtbrk1
07-14-2009, 08:40 PM
Man that would be AWESOME!! It's not a lot of work, but every person that can help makes it that much easier.

yeah ill be there at friday as soon as i can who do i ask for? and i got some random crap i can give away too if thats allowed...aint all new but its stuff:)

jowens500
07-14-2009, 08:45 PM
I sure could use the rta as well. Just not sure if I will be able to make it though. :crap:

Whatever you need will be there including some "tuning ears" (aka:judges). I know you're from the DFW area, but it will be worth the drive for sure! There will also be a hotel hookup about 10 mile from the shop in a solid location.

traksta15
07-14-2009, 08:46 PM
ill be 2 days out of shoulder surgery but im really wanting to go. I'll try and make it.

jowens500
07-14-2009, 08:49 PM
yeah ill be there at friday as soon as i can who do i ask for? and i got some random crap i can give away too if thats allowed...aint all new but its stuff:)

You can ask for me, my name is Jason.

jowens500
07-14-2009, 08:50 PM
ill be 2 days out of shoulder surgery but im really wanting to go. I'll try and make it.

That's HARDCORE right there:cool:.

Andrizzle
07-14-2009, 08:58 PM
Dam I wish i still had my gear... why does this ***** go down after I am out of the game?

FML

hrtbrk1
07-14-2009, 09:05 PM
alright will do

jowens500
07-14-2009, 09:10 PM
Dam I wish i still had my gear... why does this ***** go down after I am out of the game?

FML

Show up with a few extra coins in your pocket and you could win some brand new gear:D.

Andrizzle
07-14-2009, 09:13 PM
Yea I wouldn't mind entering some raffles or w/e. But I'm pretty poor right now lol.

jowens500
07-14-2009, 09:17 PM
Yea I wouldn't mind entering some raffles or w/e. But I'm pretty poor right now lol.

Well, the good thing about that is, the tickets will be cheap and not product specific;).

coolahan
07-14-2009, 09:23 PM
ill try and make it..


JOSE IF U READ THIS U BETTER MAKE IT TOO

traksta15
07-15-2009, 02:45 AM
That's HARDCORE right there:cool:.

Lol, plus i'm off that week.

jowens500
07-15-2009, 01:20 PM
Audio Control is shipping us an RTA with the big LED SPL scoreboard.

Also JUST got off the phone with Steve from DD and they are donating a 500 series 10" woofer and detailed box design for the winners car! Steve will be on hand also to answer any questions!

jowens500
07-15-2009, 05:59 PM
I had a few people ask how the raffle is going to work. The raffle tickets are going to be just a dollar each. You can buy as many as you want and they ARE NOT product specific. So that means you buy 1 ticket you have 1 chance of winning a prize. If you buy a 1000 tickets, you have a 1000 chances to win ALL the prizes. AND if you buy 10 tickets you get 1 free, buy 20 get 2 free, buy 30 get 3 free, ect....

hrtbrk1
07-16-2009, 02:39 PM
oh sweet...imma see u 2marro jason

MakeshiftAudio
07-16-2009, 02:41 PM
I might show up, though my car is gutted of equipment at the moment.

hrtbrk1
07-16-2009, 02:48 PM
need help sam?

MakeshiftAudio
07-16-2009, 06:27 PM
Nah, I've got it. Just need a box for the sub and I can run all of it. :) I might have it up by the 1st.

I might have 2 400.1s to burp this thing on, though I prefer daily. ;)

hrtbrk1
07-17-2009, 12:00 AM
burpin the apxx?

jowens500
07-17-2009, 08:57 PM
I got the RTA with the 180db mic and scoreboard yesterday. So any of you guys wanna know what your doing, this is a perfect opportunity to do it in a noncompetitive, friendly atmosphere.

hrtbrk1
07-17-2009, 08:59 PM
whAT the crap...why didnt i get to play with it...lol... just kidding, i aint got any subs yet

jowens500
07-17-2009, 09:03 PM
whAT the crap...why didnt i get to play with it...lol... just kidding, i aint got any subs yet

I didn't even know it was there until about 5 today. BTW, thanks again for the help today. If you don't have anything going tomorrow, we could use you again:D. It's going down big time tomorrow.

MakeshiftAudio
07-17-2009, 09:04 PM
Hmmm. I might have to throw this together. The Orion not selling is holding everything back.

PS: Nice, I like this community thing.
If you OK guys need anything machined or made in metal, just ask.

jowens500
07-17-2009, 09:53 PM
PS: Nice, I like this community thing.
If you OK guys need anything machined or made in metal, just ask.

What kind of machine you do you have? Work with aluminum?

hrtbrk1
07-17-2009, 11:06 PM
I didn't even know it was there until about 5 today. BTW, thanks again for the help today. If you don't have anything going tomorrow, we could use you again:D. It's going down big time tomorrow.
No worries bro...glad to be able to help...ill try to come around noon or so again tomorrow, i need to catch up on some sleep....or maybe from 8-12...im not sure but i'll be there

Hmmm. I might have to throw this together. The Orion not selling is holding everything back.

PS: Nice, I like this community thing.
If you OK guys need anything machined or made in metal, just ask.

yeah what kind of machinery?

MakeshiftAudio
07-17-2009, 11:41 PM
I have a moderately large mill, have access to a medium sized lathe, and in a couple of months I hope to have a new spindle on my CNC mill, which I am adding a 4th axis to.

Aluminum, copper, mild steels.... Plastics.

hrtbrk1
07-18-2009, 03:11 AM
can u make me a offroad light bar if i provide the metal?

jowens500
07-18-2009, 07:18 PM
Well, we got a LOT of work done on the shop today. I can't believe how much better it looks. A BIG THANKS go out to the few of you that showed up to help.

Robert came by and dropped off the Digital Designs 500 series 10" woofer today. Thanks again!! BTW, very nice to meet you. Sorry I didn't have much time to shoot the chit, but there will be plenty of time on the 1st.

hrtbrk1
07-18-2009, 07:39 PM
man this will be big! hopefully!...show up oklahomans

jowens500
07-18-2009, 07:46 PM
man this will be big! hopefully!...show up oklahomans

It's getting bigger everyday. I can't wait! Hope to see lots of you guys there:D.

hrtbrk1
07-18-2009, 08:06 PM
oh yeah im definately gonna be there

jonathan demuth
07-18-2009, 08:11 PM
I may show up.. if the 911 is ready to go:)

hrtbrk1
07-18-2009, 08:13 PM
I may show up.. if the 911 is ready to go:)

sweet! hope to see u there man...

jowens500
07-19-2009, 07:49 PM
I may show up.. if the 911 is ready to go:)

Well, it looks like we only have about two weeks left to finish up our installs. Or at least make them play? I have been "working" on my wife's car for about 7 months now. I finally got all the wires ran the other WEEK. So maybe in the next few I can make it make noise? That's my goal. ;)

MakeshiftAudio
07-19-2009, 07:56 PM
I may go, but just no audio. :P

Unless someone wants to whip me up a box locally. :P

I hate large woodwork.

jowens500
07-19-2009, 08:33 PM
I may go, but just no audio. :P

Unless someone wants to whip me up a box locally. :P

I hate large woodwork.

For the Altima? How big?

hrtbrk1
07-20-2009, 12:02 AM
im down to helpin...

jowens500
07-20-2009, 11:43 PM
im down to helpin...

You can come by tomorrow and I'll "teach" you how to sand;). We're close to finishing the Grey truck, but lots of sanding left to do:laugh:.

PeePeeVagina!
07-20-2009, 11:44 PM
you should go to slamily reunion

MakeshiftAudio
07-20-2009, 11:46 PM
I'd love to help you guys, but I live a ways away to drive. :P

PS: Info on the box jowens? I do amp repairs btw.

jonathan demuth
07-20-2009, 11:50 PM
Well, it looks like we only have about two weeks left to finish up our installs. Or at least make them play? I have been "working" on my wife's car for about 7 months now. I finally got all the wires ran the other WEEK. So maybe in the next few I can make it make noise? That's my goal. ;)

nic. Im getting close on the 911, so I have hopes to finish it on schedule. But I am busy as fawk, so.. no promises. may drive the car there, half finished is good enough, isnt it?:rolleyes::laugh:

jonathan demuth
07-20-2009, 11:54 PM
I'd love to help you guys, but I live a ways away to drive. :P

PS: Info on the box jowens? I do amp repairs btw.

where do you live out of curiosity? Did I read correctly that you do metal work? I need some stuff made for the porsche...

jowens500
07-20-2009, 11:54 PM
I'd love to help you guys, but I live a ways away to drive. :P

PS: Info on the box jowens? I do amp repairs btw.

Where are you at in Oklahoma? You can PM me that if you want. EDIT:I see someone beat me to it^^

I didn't even get a chance to open my shop email today, to be totally honest. I will make sure to look it over tomorrow and get back to you ASAP!

MakeshiftAudio
07-20-2009, 11:59 PM
I'm in El Reno.

As for metal work, you would have to send me designs.

Sure, it's fine, I'm just trying to get things together for the show. xD

jowens500
07-21-2009, 12:17 AM
Sure, it's fine, I'm just trying to get things together for the show. xD

We have a project that been 18 months in the making and it's got to be ready on Wednesday to go to the Texas Heat Wave. Got lots of little things to do before then.

MakeshiftAudio
07-21-2009, 12:37 AM
I was just attempting to justify my constant pestering. :P

Well, you better have pics. Sounds awesome.

jowens500
07-21-2009, 10:36 AM
I was just attempting to justify my constant pestering. :P

Well, you better have pics. Sounds awesome.

I have lot of pics, but the truck will be there on the 1st:D.

hrtbrk1
07-21-2009, 09:29 PM
You can come by tomorrow and I'll "teach" you how to sand;). We're close to finishing the Grey truck, but lots of sanding left to do:laugh:.

sorry i missed today jason...i got busy with school work, i will most definitely stop bye tomorrow after class :)

jowens500
07-21-2009, 09:50 PM
sorry i missed today jason...i got busy with school work, i will most definitely stop bye tomorrow after class :)

No problem, cant miss Rocket Science class:p:. See you tomorrow!

hrtbrk1
07-21-2009, 10:02 PM
lol haha aite bro :)

jowens500
07-24-2009, 09:34 AM
Coming up on one week to go until the G2G. So far the long term weather is looking really good for the 1st. So, lets all hope it's in the low 90's and not in the 100's. I'm super excited, and cant wait to see you all!

jowens500
07-25-2009, 11:42 PM
Just one week left, so if you're not done, better get workin!

genxx
07-26-2009, 10:59 AM
5 Days away. See you guys there.

hrtbrk1
07-26-2009, 11:01 AM
almost here!

jowens500
07-26-2009, 10:38 PM
5 Days away. See you guys there.



almost here!

Before you know it, it will be Saturday already!

hrtbrk1
07-27-2009, 08:42 PM
how the truck make it jason?

jowens500
07-27-2009, 09:13 PM
how the truck make it jason?

It turned out pretty nice. There are a few things left to do/fix but we got it 95% done to go to the show.

Here are a few shots from Friday night at about 11.30pm.
http://inlinethumb45.webshots.com/27116/2254638630102466812S600x600Q85.jpg (http://rides.webshots.com/photo/2254638630102466812AgIpbH)

http://inlinethumb19.webshots.com/42962/2236137610102466812S600x600Q85.jpg (http://rides.webshots.com/photo/2236137610102466812rOEDca)

http://inlinethumb59.webshots.com/28282/2954769010102466812S600x600Q85.jpg (http://rides.webshots.com/photo/2954769010102466812GnsPKW)

http://inlinethumb50.webshots.com/38641/2683004590102466812S600x600Q85.jpg (http://rides.webshots.com/photo/2683004590102466812ZWRhlC)

http://inlinethumb11.webshots.com/42762/2643107010102466812S600x600Q85.jpg (http://rides.webshots.com/photo/2643107010102466812EnlZoN)

http://inlinethumb09.webshots.com/25480/2950560470102466812S600x600Q85.jpg (http://rides.webshots.com/photo/2950560470102466812fBFsqD)

http://inlinethumb12.webshots.com/45451/2669769700102466812S600x600Q85.jpg (http://rides.webshots.com/photo/2669769700102466812uhoeNH)

I think the LED's look turquoise instead of blue from the light bleeding over from the monitors.

genxx
07-27-2009, 09:13 PM
Happy B-Day Jason you old muthefuker.

jowens500
07-27-2009, 09:15 PM
Happy B-Day Jason you old muthefuker.

:laugh: I'm not that much older than you are. Thanks though.

hrtbrk1
07-28-2009, 12:52 AM
dude i didnt know it was ure bday! happy birthday man and the truck looks great!

jowens500
07-28-2009, 03:34 PM
dude i didnt know it was ure bday! happy birthday man and the truck looks great!

Thank you, and thank you.

Just a few days to go. I hope everyone is closer to being finished than I am. It looks like a few more late night are in store for me.

hrtbrk1
07-28-2009, 03:48 PM
same here...workin on the jeep a lil today...:)

jowens500
07-28-2009, 03:54 PM
same here...workin on the jeep a lil today...:)

I really don't have much left to do, just the whole trunk, in about 2 days:crap:.

hrtbrk1
07-28-2009, 03:56 PM
2 days?

jowens500
07-28-2009, 04:00 PM
2 days?

Gotta put a limit on it somehow. Plus I don't want to be at the shop until who knows when on Friday:).

genxx
07-28-2009, 04:07 PM
We will get it finished. No worries Jason.

hrtbrk1
07-28-2009, 04:08 PM
We will get it finished. No worries Jason.

bryan?

hrtbrk1
07-28-2009, 04:09 PM
Gotta put a limit on it somehow. Plus I don't want to be at the shop until who knows when on Friday:).

oh i see...well..ill try to stop by tomorrow or something:) i should be done with mine today...well for the most part..i can do the amp rack some other time

genxx
07-28-2009, 04:09 PM
Yes, Brian thats me.

Whats up?

Only a few days left.

Hell no finish that amp rack now.LOL

jowens500
07-28-2009, 04:10 PM
bryan?

Yeah, that's his dumb ***.

And I aint worried about getting it done.

hrtbrk1
07-28-2009, 04:10 PM
Yes, Brian thats me.

Whats up?

Only a few days left.

Hell no finish that amp rack now.LOL

haha i aint got time to make everything look pretty...got other stuff to do first lol...and besides...we needa get jasons car done lol...

hrtbrk1
07-28-2009, 04:11 PM
Yeah, that's his dumb ***.

And I aint worried about getting it done.

oh ok lol...well i'll still stop bye...and maybe i'll work on an amp rack

genxx
07-28-2009, 04:11 PM
You shouldn't be. Now get off of here and get to work on the car.---Same **** you give me when you see me on-line when I should be working on a install.LOL

hrtbrk1
07-28-2009, 04:12 PM
lol

genxx
07-28-2009, 04:14 PM
I did get all of the SUV front stage changed out yesterday.

Big difference. It does pretty darn well keeping up with the new subs. Should be good for Street Beat now.

A-Pillars-TBI Tweeters
Kicks-HD-3
Door-CDT ES-600

Only got one HD-3 installed due to the darn fuse box on the passenger side. It will take a little more modification, going to try and get it done today. The wire and everything is done already.

Did as a quazi-active set-up off a 4 channel amp.

Probably need to upgrade the rear door speakers but to power them I will need to switch to a 6 channel amp. Cannot add a 2-channel due to space.

Pretty fun vehicle to just rip the volume knob off of now. Especially considering the money in the entire thing which is less then $800 bucks.

hrtbrk1
07-28-2009, 04:16 PM
whoa...sounds good man...can't wait to hear it on saturday

jowens500
07-28-2009, 04:16 PM
It's too hot. Plus I worked today. I put 4 CB antennas in today for my dad. Over

Plus my car will be done by then, I'm just not worried........yet. Over

hrtbrk1
07-28-2009, 04:17 PM
roger that over....*static* over

genxx
07-28-2009, 04:17 PM
You are screwed now. New lingo seems to be all CB talk. OVER

jowens500
07-28-2009, 04:19 PM
:laugh: over

genxx
07-28-2009, 04:21 PM
Well I am out of here. Going to head to the house. You guys have fun.

Over

&

Out

jowens500
07-28-2009, 04:22 PM
Well I am out of here. Going to head to the house. You guys have fun.

Over

&

Out

Roger that. over

hrtbrk1
07-28-2009, 04:22 PM
roger...over

Andrizzle
07-29-2009, 01:48 AM
Okay I am pretty sure I will be in Norman this weekend, I will come by with some buddies! I wanna hear some loud systems!

genxx
07-29-2009, 12:45 PM
Not sure how many are actually loud.

Aho should be doing about a 155 to 157. Corey if he comes does I think low 150's. My SUV I am hoping for mid to high 140's. Not sure what Danny's truck will do but I would think easy in the high 140's maybe in the 150's.

hrtbrk1
07-29-2009, 05:36 PM
i can do high 40s in the kick with the old setup lol...but this is pretty new never got metered...still need te do the big three but lost my spool of wire...

hrtbrk1
07-29-2009, 05:42 PM
Not sure how many are actually loud.

Aho should be doing about a 155 to 157. Corey if he comes does I think low 150's. My SUV I am hoping for mid to high 140's. Not sure what Danny's truck will do but I would think easy in the high 140's maybe in the 150's.

is that tl or the rta?

genxx
07-29-2009, 05:48 PM
Aho and Corey is TL. Its a guess on Danny's truck with TL.

My SUV is a hope with a TL.

I am only running a AMX100.2 to 2 15" M-Class Memphis subs. So mine is not an all out SPL vehicle its just something fun to play with in the 0-600 stock class.

Aho vehicle will get with it. He is running a T4000 and 4 DD 15's. He was low 150's with just 2 and major voltage drop down to 10volts before he added two more batteries and 2 more 15's so he should be right around 155 anytime and on a best run a 157.

genxx
07-29-2009, 05:51 PM
How the hell do you loose a spool of wire???

jowens500
07-29-2009, 09:10 PM
How the hell do you loose a spool of wire???

I was wondering the same thing.

If anyone is not doing anything tomorrow and would like to come help clean up the shop, we could sure use it. Just a little more yard work and clean up the shop some. Thanks again:D!

genxx
07-29-2009, 09:56 PM
I will see you at 9 am but you already new that.

jowens500
07-29-2009, 10:26 PM
I will see you at 9 am but you already new that.

If anyone else has nothing to do.........

And don't forget that we have an Audio Control RTA with the LED scoreboard. So that means free burps:).

hrtbrk1
07-30-2009, 03:47 PM
If anyone else has nothing to do.........

And don't forget that we have an Audio Control RTA with the LED scoreboard. So that means free burps:).
sweet...i can stop by tomorrow, im kinda busy today

How the hell do you loose a spool of wire???

mom cleaned up and misplaced it

Andrizzle
07-30-2009, 07:07 PM
Looks like a chance for afternoon storms. Do alot of you guys know each other or something? I totally don't know anyone except Eman and I have never met him lol.


Hopefully storms wait until the chillin is over!

hrtbrk1
07-30-2009, 07:48 PM
Looks like a chance for afternoon storms. Do alot of you guys know each other or something? I totally don't know anyone except Eman and I have never met him lol.


Hopefully storms wait until the chillin is over!

lol i know jason and brian...i met them cleaning up there...

jowens500
07-30-2009, 11:15 PM
sweet...i can stop by tomorrow, im kinda busy today


mom cleaned up and misplaced it

Sweet! Can use your help tomorrow for sure! And I have some wire you can have to replace the misplaced ones.


Looks like a chance for afternoon storms. Do alot of you guys know each other or something? I totally don't know anyone except Eman and I have never met him lol.


Hopefully storms wait until the chillin is over!

I have know Brian for about 10 years or so and Eman a couple of weeks.

It's still going down regardless of the weather.

hrtbrk1
07-31-2009, 12:10 AM
alrighty man...will stop by like at 1 or after...as for the wire don't worry. it was just for my big three...can get some...later on in life

hrtbrk1
07-31-2009, 12:13 AM
u get ur car done jason?

jowens500
07-31-2009, 12:13 AM
alrighty man...will stop by like at 1 or after...as for the wire don't worry. it was just for my big three...can get some...later on in life

See you then. Did you not see the overflowing box of wire we have? You can have the wire.

hrtbrk1
07-31-2009, 12:14 AM
See you then. Did you not see the overflowing box of wire we have? You can have the wire.

nope lol...

jowens500
07-31-2009, 12:14 AM
u get ur car done jason?

Close. Here's where we got tonight.
http://inlinethumb17.webshots.com/45776/2028423750102466812S600x600Q85.jpg (http://rides.webshots.com/photo/2028423750102466812mUrFia)

hrtbrk1
07-31-2009, 12:22 AM
pretty :) what subs goin in?

jowens500
07-31-2009, 12:24 AM
Hertz ML250. Did I not show it to you?

MakeshiftAudio
07-31-2009, 12:24 AM
Sorry guys, I won't be making it. Too much stuff got piled on recently. :\ I may go though, just no soundz.

hrtbrk1
07-31-2009, 12:25 AM
man i forgot...i'm sure u did...

hrtbrk1
07-31-2009, 12:25 AM
Sorry guys, I won't be making it. Too much stuff got piled on recently. :\ I may go though, just no soundz.

buy some raffle tickets sam

stuckinok
07-31-2009, 12:26 AM
Ill be there pretty early.... hope to see you guys

hrtbrk1
07-31-2009, 12:27 AM
sweet! hey stuck, whats ure real name?

stuckinok
07-31-2009, 12:28 AM
Looks like a chance for afternoon storms. Do alot of you guys know each other or something? I totally don't know anyone except Eman and I have never met him lol.


Hopefully storms wait until the chillin is over!

***** you know me.......

Even though we never really met lol.....

MakeshiftAudio
07-31-2009, 12:29 AM
Could someone PM me the info? I'm a lazy bum that doesn't want to scan pages.
Time, location? Or just post it here.

What are the tickets for and how much are they?

stuckinok
07-31-2009, 12:29 AM
sweet! hey stuck, whats ure real name?

Jose...


Whats yours man?

hrtbrk1
07-31-2009, 12:31 AM
Could someone PM me the info? I'm a lazy bum that doesn't want to scan pages.
Time, location? Or just post it here.

What are the tickets for and how much are they?
its on Advantage Audio on Lindsay...

friendly get together
Have 2 rta meters
raffle tickets are $1 a piece i think...

Jose...


Whats yours man?
Eman

stuckinok
07-31-2009, 12:34 AM
its on Advantage Audio on Lindsay...

friendly get together
Have 2 rta meters
raffle tickets are $1 a piece i think...

Eman

Nice to meet cha...

MakeshiftAudio
07-31-2009, 12:34 AM
Um, what's the raffle for? :laugh: The RTA meters?


And, if anyone needs an amp repaired, I'll be there and we could make a dropoff/exchange.

Andrizzle
07-31-2009, 12:36 AM
Anyone going wanna buy a P780MP?

stuckinok
07-31-2009, 12:36 AM
Um, what's the raffle for? :laugh: The RTA meters?

Jason and a few other got us a tons of **** for the raffle. There are even door prizes! Everything from speakers to amps will be given out.

MakeshiftAudio
07-31-2009, 12:37 AM
Coo beans. I could throw in something random if I find something you guys would be interested in. xD Want a box of dead mosfets?

How about a 10% off an amp repair coupon?

jowens500
07-31-2009, 12:38 AM
Sorry guys, I won't be making it. Too much stuff got piled on recently. :\ I may go though, just no soundz.
Come anyway.

man i forgot...i'm sure u did...
I'm pretty sure I did

buy some raffle tickets sam
For sure! And get free food and drinks:).

Could someone PM me the info? I'm a lazy bum that doesn't want to scan pages.
Time, location? Or just post it here.

Advantage Audio
1815 W Lindsey St
Norman, OK 73069
405 579 1204
From 9am to whenever.

What are the tickets for and how much are they?
So far the raffle prizes are:
Hertz HSK 163.3
Hertz EP4
Zapco RB15.2 TWO PAIRS
DD 500 Series 10
Pioneer DEH11E
Hooker Audio 4ga amp kit
Hooker Audio 8ga amp kit
Memphis M112 ONE PAIR
Maxxbass 103
DynaMat door kit(I think)
Clarion 6x9's

hrtbrk1
07-31-2009, 12:43 AM
yeah itll be a good show :) regardless of weather

MakeshiftAudio
07-31-2009, 12:43 AM
Hey Jason, if you make that box for me, out of plain MDF, I could bring the sub and let someone power it up. :) My car isn't rigged up, but I can bring some batts and hook it to someone else's electrical. :laugh: The biggest amp I have working right now is the Orion 2500D.

stuckinok
07-31-2009, 12:45 AM
its cool just to meet people.....

I am glad it will be good mix of SPL guys and SQ peeps

jowens500
07-31-2009, 12:45 AM
Hey Jason, if you make that box for me, out of plain MDF, I could bring the sub and let someone power it up. :) My car isn't rigged up, but I can bring some batts and hook it to someone else's electrical. :laugh: The biggest amp I have working right now is the Orion 2500D.

I honestly don't think we'd have time to get it done before Saturday. I gotta get my wife's car done or she's gonna shoot me!:laugh:

hrtbrk1
07-31-2009, 12:46 AM
Anyone going wanna buy a P780MP?
no lol...sorry


Nice to meet cha...
you too

Hey Jason, if you make that box for me, out of plain MDF, I could bring the sub and let someone power it up. :) My car isn't rigged up, but I can bring some batts and hook it to someone else's electrical. :laugh: The biggest amp I have working right now is the Orion 2500D.
u can hook it up to my car :) 3000d on almost stock elec though...

jowens500
07-31-2009, 12:47 AM
its cool just to meet people.....

I am glad it will be good mix of SPL guys and SQ peeps

I think we have enough space that we can draw a line down the middle. SQ on this side, SPL on the other side:laugh:.

hrtbrk1
07-31-2009, 12:50 AM
haha nah lets not doo that! lol...

hrtbrk1
07-31-2009, 12:51 AM
just kiddins

MakeshiftAudio
07-31-2009, 12:54 AM
Well, if anyone wants to poop out a box, go ahead. I'm tired of waiting. I don't mind MDF.

jowens500
07-31-2009, 12:55 AM
Yeah, I was too!

hrtbrk1
07-31-2009, 12:58 AM
Well, if anyone wants to poop out a box, go ahead. I'm tired of waiting. I don't mind MDF.
for what sub?

Yeah, I was too!

u too? man im lost lol

MakeshiftAudio
07-31-2009, 01:02 AM
APXX 18"

I have the sketchup ready.

hrtbrk1
07-31-2009, 01:04 AM
darn...thats too big...was gonna do a direct swap

MakeshiftAudio
07-31-2009, 01:06 AM
darn...thats too big...was gonna do a direct swap

:laugh: Never. No such thing.

Thanks for the thought though. Anyone else have an 18" box they wanna swap with/let me borrow for the day? :laugh:

jowens500
07-31-2009, 01:08 AM
u too? man im lost lol

It would be funny and the SQ guys probably for it, but I wouldn't do it;).

MakeshiftAudio
07-31-2009, 01:21 AM
Well, I'll hope to be there. If anyone has a spare 18" box sitting around, I'd appreciate renting it for the day. :laugh:

ChedNompton
07-31-2009, 01:27 AM
Well, I'll hope to be there. If anyone has a spare 18" box sitting around, I'd appreciate renting it for the day. :laugh:

I got one in my garage if you wanna barrow it. Don't know if it'll work for you or not, PM if want dimensions/specs.
Larson

hrtbrk1
07-31-2009, 01:30 AM
:laugh: Never. No such thing.

Thanks for the thought though. Anyone else have an 18" box they wanna swap with/let me borrow for the day? :laugh:
lol whatever u say


It would be funny and the SQ guys probably for it, but I wouldn't do it;).
haha yea true

I got one in my garage if you wanna barrow it. Don't know if it'll work for you or not, PM if want dimensions/specs.
Larson
hey another okie wutsup

jowens500
07-31-2009, 01:35 AM
hey another okie wutsup

And he's from Norman, so no reason he can't be there:laugh:.

hrtbrk1
07-31-2009, 01:45 AM
And he's from Norman, so no reason he can't be there:laugh:.

true story homie!...u gotta be there

ChedNompton
07-31-2009, 01:47 AM
Sounds good to me, I won't be up there tell around 2 though. So anyone gonna have a TL or something of the sort?
Larson

hrtbrk1
07-31-2009, 01:49 AM
RtA

MakeshiftAudio
07-31-2009, 09:29 PM
So what's the headcount for how many people?

Turns out I'm going to be taking the Yukon XL, picking up the box, powering that stuff up with batts, only using the alt to charge. I do not have much spare smaller gauge wire, so I will need to buy some wire from the shop.

Edit: Also, do you guys have some ANL fuse holders and fuses? I'm out of both, and I don't want to make a fuse holder at the moment. I might have to, but do you guys have at least a 300A ANL fuse?

jowens500
08-01-2009, 12:15 AM
So what's the headcount for how many people?

Turns out I'm going to be taking the Yukon XL, picking up the box, powering that stuff up with batts, only using the alt to charge. I do not have much spare smaller gauge wire, so I will need to buy some wire from the shop.

Edit: Also, do you guys have some ANL fuse holders and fuses? I'm out of both, and I don't want to make a fuse holder at the moment. I might have to, but do you guys have at least a 300A ANL fuse?

I just got home from the shop. Powell and I worked on my wife's car ALL DAY and the M'effer still isn't playing right. Can anyone say "**** on a 360.2"? Anyway, see you guys in the morning.

I am hoping on having around 40 cars there all day and more people coming and going most of the day.

I'm pretty sure the biggest I have at the moment is a 200a.

stuckinok
08-01-2009, 12:31 AM
see you fegs in the morning

hrtbrk1
08-01-2009, 12:41 AM
So what's the headcount for how many people?

Turns out I'm going to be taking the Yukon XL, picking up the box, powering that stuff up with batts, only using the alt to charge. I do not have much spare smaller gauge wire, so I will need to buy some wire from the shop.

Edit: Also, do you guys have some ANL fuse holders and fuses? I'm out of both, and I don't want to make a fuse holder at the moment. I might have to, but do you guys have at least a 300A ANL fuse?
hit me up a text so i dont forget...i got some stuff lying around...i can let u borrow it...but i might need it back

I just got home from the shop. Powell and I worked on my wife's car ALL DAY and the M'effer still isn't playing right. Can anyone say "**** on a 360.2"? Anyway, see you guys in the morning.

I am hoping on having around 40 cars there all day and more people coming and going most of the day.

I'm pretty sure the biggest I have at the moment is a 200a.
dang sweet...sad about the car...and sorry for not makin it back 2night...dinner dragged a while

jowens500
08-01-2009, 12:41 AM
I'll be there at 8am if anyone wants to show up that early.

It will be playing right tomorrow for sure!

hrtbrk1
08-01-2009, 12:42 AM
will be there :)

jowens500
08-01-2009, 12:44 AM
I'm so tired, yet so excited I may not be able to fall asleep!

MakeshiftAudio
08-01-2009, 12:53 AM
I just made the most ghetto fuseblock I've ever seen, but it's precise down to .01"... It's based on a piece of wood. Want pics or do you want to wait until tomorrow?

Have 2 150s?

hrtbrk1
08-01-2009, 12:55 AM
yeah i shud...i got a 300 im sure

hrtbrk1
08-01-2009, 12:57 AM
yeah i got a 300...just checked and a fuseholder

MakeshiftAudio
08-01-2009, 01:01 AM
That would be awesome man! How much do you want for it?

It's based on 2 250kcmil (one size bigger than 4/0) alu terminal blocks. I'm kind of ashamed to have it, but I don't have a spare one and I don't want to take other things apart. It's kind of interesting looking as well.

hrtbrk1
08-01-2009, 01:09 AM
uh...man id hate to sell it lol...so hows 23? its 2 dollars less than knu

MakeshiftAudio
08-01-2009, 01:12 AM
I'm talking about the fuse. xD This fuse holder will be fine.

jowens500
08-01-2009, 01:12 AM
uh...man id hate to sell it lol...so hows 23? its 2 dollars less than knu

Keep your stuff Elroy, I should have two 150's.

hrtbrk1
08-01-2009, 01:14 AM
Keep your stuff Elroy, I have an ANL fuse holder he can buy for $20. I should have two 150's.

lol ok...haha ill bring them just incase...its still all new anyways :) yeah ill be there around 8 to help set up

jowens500
08-01-2009, 01:16 AM
See you guys in the morning. I'm going to bed.

Over and OUT!

hrtbrk1
08-01-2009, 01:19 AM
roger...over...*click*

MakeshiftAudio
08-01-2009, 01:38 AM
I'm finishing all the pre-wiring on all the stuff, then I'll head out for bed.

I might need to buy some 8AWG from you guys for wiring the sub. That'll be tomorrow.

jowens500
08-01-2009, 09:11 AM
GOOD MORNING ladies! See you all in a few hours:).

MakeshiftAudio
08-01-2009, 09:08 PM
A lot of you guys left right when I got there. :( Got a 144.7 on dash with a Yukon XL. For all those that were there, I was the last one that was metered, after the raffle calling was over.

Edit: I also made a 151.9 at the port. I threw this rig together over night and finished it in the morning after Larson gave me the box. Thanks again!

jowens500
08-01-2009, 10:16 PM
First off I would like to say THANK YOU to everyone that showed up. I didn't take an official car count, but would say it had to be close to 40 or so. Everything went as planned and really enjoyed meeting/seeing everyone.

Second, for anyone who listened to my Honda, I apologize for how bad it sounded. If I would have actually listened to it myself first, I don't think I would have pulled it outside.

Anywho, looking forward to next years G2G and again, a big thanks go out to you guys for driving as far as some of you did!

Jason

MakeshiftAudio
08-01-2009, 10:23 PM
Yeah, I had a good time. I received a better score than I expected. I didn't socialize that much, because I was throwing stuff together at the last second.

I look forward to the next one. :) I might have my build ready in time next time. :laugh:

ChedNompton
08-01-2009, 10:35 PM
A lot of you guys left right when I got there. :( Got a 144.7 on dash with a Yukon XL. For all those that were there, I was the last one that was metered, after the raffle calling was over.

Edit: I also made a 151.9 at the port. I threw this rig together over night and finished it in the morning after Larson gave me the box. Thanks again!

No problem, hope it treats you well. I forgot to ask, but did you get the BL metered? And thanks Jason for hosting this, don't know if I met you or not. Larson

jowens500
08-01-2009, 11:29 PM
Yeah, I had a good time. I received a better score than I expected. I didn't socialize that much, because I was throwing stuff together at the last second.

I look forward to the next one. :) I might have my build ready in time next time. :laugh:

It was a lot of fun and if you didn't bother coming, you missed out:p:!


No problem, hope it treats you well. I forgot to ask, but did you get the BL metered? And thanks Jason for hosting this, don't know if I met you or not. Larson

I was the one with the Dynamat hat on running around like a chicken with it's head cut off:laugh:. You are in Norman right? If so, stop by and say HI!

ChedNompton
08-02-2009, 12:06 AM
It was a lot of fun and if you didn't bother coming, you missed out:p:!



I was the one with the Dynamat hat on running around like a chicken with it's head cut off:laugh:. You are in Norman right? If so, stop by and say HI!

Sure will man. By the way, if you ever need some help man, just holler, an extra hand can be very useful sometimes. Also something I've never asked you guys over there, do you guys have a meter on hand usually?
Larson

jowens500
08-02-2009, 12:11 AM
Sure will man. By the way, if you ever need some help man, just holler, an extra hand can be very useful sometimes. Also something I've never asked you guys over there, do you guys have a meter on hand usually?
Larson

I have an RTA, but it needs to be sent back to AC and get some update/upgrades. Right now it only read to like 136, I think.

ChedNompton
08-02-2009, 12:23 AM
I have an RTA, but it needs to be sent back to AC and get some update/upgrades. Right now it only read to like 136, I think.
Sounds like a fun toy, always wanted to mess with one of those. Maybe I can swing by the shop some time and mess with it for a bit, that is if its ok with you.
Larson

MakeshiftAudio
08-02-2009, 12:26 AM
Sounds like a fun toy, always wanted to mess with one of those. Maybe I can swing by the shop some time and mess with it for a bit, that is if its ok with you.
Larson

Yeah, you need to get that car metered. ;) I'm sure it'll play nicely with the meter.

ChedNompton
08-02-2009, 12:33 AM
Yeah, you need to get that car metered. ;) I'm sure it'll play nicely with the meter.

It'd be cool to get it metered with 1 amp than 2 amps, and at .5 strapped and 2 ohms strapped.... but don't know if that'll ever happen. Also, would be nice to have some "sq" involved in the car.

jowens500
08-02-2009, 12:49 AM
It'd be cool to get it metered with 1 amp than 2 amps, and at .5 strapped and 2 ohms strapped.... but don't know if that'll ever happen. Also, would be nice to have some "sq" involved in the car.


Yeah, you need to get that car metered. ;) I'm sure it'll play nicely with the meter.


Sounds like a fun toy, always wanted to mess with one of those. Maybe I can swing by the shop some time and mess with it for a bit, that is if its ok with you.
Larson

If you have any kind of EQ in your system, spending even a few hours tuning it with an RTA will do wonders for the sound. And your more than welcome to come and play with the RTA. That's what it's for:D.

Andrizzle
08-02-2009, 05:35 PM
Yea I'm a feggot I didn't go. I had some friends come in town friday night and it was all over after that.

Where are the pics!?

hrtbrk1
08-03-2009, 01:24 AM
yeah guys it was great...sorry for just postin now...just got back from tulsa..

jason, apologies for not sticking long enough to help clean

and sam, u r-tard came too late lol...glad u made it though :)

hrtbrk1
08-03-2009, 01:42 PM
found my spool!!! moving out does do wonders :)