View Full Version : Kicker L7 15"

07-12-2009, 03:45 PM
Does anyone happen to know the displacement for the '08 15" L7 as well as the recommended port area in square inches per cubic foot?

07-12-2009, 03:52 PM
please try 1st then ask
google kicker then select ahh hell just click link i did it for you you owe me 10 seconds of my life back

07-12-2009, 03:58 PM
First of all, you linked me to the L5. Second of all, I have already looked at the T/S Parameters and the correct manual and none of them list either value. Also, google didn't help at all. Thanks bud, but next time, try to hold back your ego long enough to realize how ignorant and stupid you're being.

07-12-2009, 04:12 PM
ok forgive me i linked the L 5 woops
however while the displacement is not there the recomended port dimentions are in-fact THERE ON PAGE 3 so i appologize for wrong link but 1 half of what you asked for was there so just do a little math and put YOUR EGO BACK IN YOUR PANTS

SAYS 3.0FT^3 W/ PORT 2.5"X 16.5" MIN 6.0FT^3 W/ PORT 3.5 X 16.25"
so apparently kicker does not have a set sq in per cube reccomendation
but since your sooooo knowledgeable I'm sure you kno the average is 12-16 sq in per cube
so good luck with finding your displacement