View Full Version : Box Design Confirmation

07-12-2009, 01:13 AM
A single Pioneer Premier TS-W3001D4 is going into it. They spec 1.5 cu for a ported enclosure. So does everything look right on there? any ideas to improve it while keeping the dimensions even, the tuning from 32-38 hz, and the volume to 1.5 ^3ft
aslo, why like on the left panel, are there 4 dimensions? is it going to be 2 pieces on top of each other? thanks in advance for the help?

07-12-2009, 10:37 AM
no its be cause the re calc give you the option to do a wedge box thats why it asks top width and bottom width if you had made those different the 2nd set of dims on the side panels would be different

07-12-2009, 11:00 AM
also, is 37hz good for rock music with punchy double bass? if not then what hz is?

07-12-2009, 11:08 AM
Yep. that tuning should be good for rock, you could even go with 40 but I am not sure if that sub will do well below tuning at all so I would stick with what the manufacturer recommends..

07-12-2009, 12:28 PM
thanks guys.