PDA

View Full Version : Where to get a Jasper Circle Jig



rival904
07-10-2009, 02:35 AM
Im trying to hunt down one locally, where can I get one?

Home depot did not have, any ideas?

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=365-250

dappa5
07-10-2009, 08:45 AM
i got mine @ tyler tools
http://search.store.yahoo.net/cgi-bin/nsearch?catalog=tylertool&query=jasper&x=12&y=7&vwcatalog=tylertool
buy the 200 ive an older 270 and i hade to make the smaller circle size holes my self so for a few bucks more it's worth it

TheyDontWant
07-10-2009, 08:47 AM
I got a free piece of perspex and cut it to size...

perfect?

dappa5
07-10-2009, 08:52 AM
i've used every thing over the years wood and clamps, home made jigs etc... but that jasper jig was the best $30 i've spent in a long time

TheyDontWant
07-10-2009, 08:54 AM
i've used every thing over the years wood and clamps, home made jigs etc... but that jasper jig was the best $30 i've spent in a long time

then you're doing it wrong :) :P

dappa5
07-10-2009, 08:57 AM
then you're doing it wrong :) :P

wtf i just said the jig is handy and money well spent??:confused: w/e

SicAudio
07-10-2009, 09:22 AM
dont know many places that sell local try a lumber or cabinet mill

Louisiana_CRX
07-10-2009, 09:27 AM
just order one from parts express...

SicAudio
07-10-2009, 09:41 AM
2 day shipping and way cheaper than anywhere local any way http://www.parts-express.com/wizards/searchResults.cfm?srchExt=Mfg&srchMfg=89

dappa5
07-10-2009, 09:50 AM
2 day shipping and way cheaper than anywhere local any way http://www.parts-express.com/wizards/searchResults.cfm?srchExt=Mfg&srchMfg=89

^^^x2 it's 3 bucks cheaper and shipping is the same just make sure you get the 200

jmanpc
07-10-2009, 01:29 PM
I've got one. I'll let you use it :)

jco1385
07-10-2009, 01:31 PM
http://www.woodcraft.com/family.aspx?familyid=3582&ProductID=129955

rival904
07-10-2009, 01:57 PM
I've got one. I'll let you use it :)

Probably going to take you up on that offer.

dB-SPL
07-10-2009, 09:58 PM
then you're doing it wrong :) :P

With a Jasper Jig, there is no wrong, Unless you simply can't figure out radius with basic math.. :fyi: