PDA

View Full Version : 3cft enough for 1 re se 15?



sweenster123
07-09-2009, 04:28 PM
Im thinking of getting back into car audio and i was wondering what would be a good size for 1 re se 15. also i am wanting to tune it pretty low something like 28 hz. would you recommend tuning that low? also would you fire it into the cabin or to the back of the trunk?

dappa5
07-09-2009, 04:39 PM
says minimal is 3.0 ft^3 @ 35 but what th hell it only money right
http://www.reaudio.com/specs.html#sp_***
plus depends on what power you plan on using if over powering is ok to go slightly small

ps do some research on your own it took me all of ten sec to open a new tab google re audio then get to tech spec page and copy link so plse try nxt time

burzendowski
07-09-2009, 05:48 PM
yes 3 cubes will work .

sweenster123
07-09-2009, 11:30 PM
says minimal is 3.0 ft^3 @ 35 but what th hell it only money right
http://www.reaudio.com/specs.html#sp_***
plus depends on what power you plan on using if over powering is ok to go slightly small

ps do some research on your own it took me all of ten sec to open a new tab google re audio then get to tech spec page and copy link so plse try nxt time

Ok im not dumb so dont be a ******** with it. i was asking a simple question. i dont care what the specs say i never go by them. I can tune to whatever i want and i am overpowering but i dont care.