PDA

View Full Version : Need a box design



Toone
07-06-2009, 11:36 PM
Need a design for 2 15" RE SE's
Max dims are

W-39
H-19
D-26

Wanna go subs forward port up.

dappa5
07-06-2009, 11:38 PM
pm me i'll do you one up

DNick454
07-06-2009, 11:41 PM
Why subs forward with port up in an SUV? Subs up with port back or at least port to the side would be way better. Also... I'm not sure if you're going to have enough volume with those dimensions but let me go calculate some stuff real quick.

thehardknoxlife
07-06-2009, 11:42 PM
Try this (http://www.caraudio.com/forum/showthread.php?t=414622) out.

Toone
07-06-2009, 11:43 PM
Why subs forward with port up in an SUV? Subs up with port back or at least port to the side would be way better. Also... I'm not sure if you're going to have enough volume with those dimensions but let me go calculate some stuff real quick.

Port up seems to be the loudest in my car

DNick454
07-06-2009, 11:44 PM
Nevermind, you'll have enough room for a solid 3.5 cubes per sub with 100+ sq. in of port area tuned in the low 30's.

dappa5
07-06-2009, 11:44 PM
Try this (http://www.caraudio.com/forum/showthread.php?t=414622) out.

lol ^^^^^^^^^^^^^^^^x one thousand
ty i needed that :crazy:

mr.michael
07-06-2009, 11:45 PM
im so not smart enough to do that

dappa5
07-06-2009, 11:45 PM
p.s. dnick is right(as usual) bout subs up port back

DNick454
07-06-2009, 11:45 PM
Try this (http://www.caraudio.com/forum/showthread.php?t=414622) out.

That's 1000x's more difficult than simply designing a box from scratch in Sketchup and calculating volume and then determining port length and subtracting all displacements.

dappa5
07-06-2009, 11:47 PM
im so not smart enough to do that


but you can upload tat silly pic as your avitar and than draw all over it??:wow:
" geeessshh todays youth " lol:crap:

thehardknoxlife
07-07-2009, 12:14 AM
im so not smart enough to do that
Sure you are. Try. It's all written out.....I think.





That's 1000x's more difficult than simply designing a box from scratch in Sketchup and calculating volume and then determining port length and subtracting all displacements.It's not as hard as it looks. If you know how to do basic algebra then all you have to do is remember the formula. Then you don't need a program to do anything for you. Plus, doing it on paper is 1000x faster.

How long does it take you to use the 3 programs to design a box? I can use this in under 5 minutes.