PDA

View Full Version : box design and ideas.



Girr
07-03-2009, 08:01 PM
Im going from a wagon with tons of room to a trunk with limited space. I could use some designs and ideas for the new car.

I have a L712 d4 @ 2ohms and runing it on a kicker 700.5. so only 400w rms are going to the sub untill I get the funds to go with a multi amp setup.

Im thinking of possibly going sealed if I cant get the tuning/cf but would rather go ported. Budget is tight so cant got real areos but can do pvc and port into cabin of the car through the empty 6x9 holes.

I have a 93 le baron and hope to go sub and port towards rear. To fit in between the trunk hardware this is about the max I can go to fit.

37w
15h
19d

Would like 3ish cf @ 32-36hz.

Any help or ideas ouside of getting a new car lol would be apricated.:crap:

Girr
07-04-2009, 01:35 PM
Ok decided to try ported within those dimensions. Any one want to help me out and shoot me a design for a 3cf 33hz slot port within those specs?

Free would be preferred because my box budget is already over with paint this time :wow:

GearGuy2001
07-04-2009, 02:43 PM
http://reaudio.com/speaker_box/LPort_Box_Calc.html

Type:
37
15
15
15
.75
3
10

You get 3.1 @ 33.2Hz

The cut sheet is on the website and I am practicing making boxes so I drew that box in sketchup.

http://img.photobucket.com/albums/v157/GearGuy2001/caraudio/3133hzl7.jpg
http://img.photobucket.com/albums/v157/GearGuy2001/caraudio/3133hzl7v1.jpg

Girr
07-06-2009, 06:13 PM
sweet thanks for the responce :D