PDA

View Full Version : Jasper Jig pivot pin



Pitchblack98
07-01-2009, 03:40 PM
Can anyone tell me what the diameter is for the centering pin on the Jasper Jig. I found one used pretty cheap, but it doesnt come with any hardware. I want to see if I can find a nail or something to use as a centering pin before it gets to me.

fasfocus00
07-01-2009, 03:42 PM
a nail would work fine

wu501
07-01-2009, 03:42 PM
should be 1/8"

ramos
07-01-2009, 03:47 PM
should be 1/8"

Ding, I use half of a 1/8th drill bit most of the time. Lost the pin years ago lol :)

Pitchblack98
07-01-2009, 03:49 PM
Cool. Thanks guys. I'm sure I have a broken 1/8" drill bit laying around. lol

406er
07-01-2009, 06:55 PM
1/8 for the winz

mmouse57
07-02-2009, 02:27 PM
just drill the 1/8in hole with the drill bit then flip it over and put the end that the drill holds into the hole and slide the jasper jig over it i alwasy use a 1/8thin drill bit casue it is easier not to loose :)