View Full Version : Jasper Jig pivot pin

07-01-2009, 02:40 PM
Can anyone tell me what the diameter is for the centering pin on the Jasper Jig. I found one used pretty cheap, but it doesnt come with any hardware. I want to see if I can find a nail or something to use as a centering pin before it gets to me.

07-01-2009, 02:42 PM
a nail would work fine

07-01-2009, 02:42 PM
should be 1/8"

07-01-2009, 02:47 PM
should be 1/8"

Ding, I use half of a 1/8th drill bit most of the time. Lost the pin years ago lol :)

07-01-2009, 02:49 PM
Cool. Thanks guys. I'm sure I have a broken 1/8" drill bit laying around. lol

07-01-2009, 05:55 PM
1/8 for the winz

07-02-2009, 01:27 PM
just drill the 1/8in hole with the drill bit then flip it over and put the end that the drill holds into the hole and slide the jasper jig over it i alwasy use a 1/8thin drill bit casue it is easier not to loose :)