PDA

View Full Version : Box plans for 2 12" RE SE's needed



gearhound17
06-28-2009, 11:59 PM
I have 2 12" RE SE's and I want to build a ported box for my Tacoma extra cab.
Powered by a Sundown Sae1200d.
From what I have researched it should be 4 cu ft tuned to 33 hz and around 64 sq in of port.
I think I want sub up/port up or maybe sub front/port up.
Am looking for a dual port configuration either on the ends or in the middle.
Max dims are 49 w x 12 h x 16 d. Might be able to add a bit to the height.
Would like to see a sample of what it looks like. Also would like cut sheet.
I have something I might use from RE's sight but looking to see what other designs are available.

Let me know what you have and price.

406er
06-29-2009, 12:34 AM
you wont have enough volume with those dimentions, the box gross volume is 4.2 cu ft. ya still need room for subs and port. you could get away with 3.6 cu ft net and perhaps a tuning of 35Hz. i would go with a 4" wide port 14.5" tall. please let us know your MAX dimensions

MmatsDude
06-29-2009, 12:36 AM
you wont have enough volume with those dimentions, the box gross volume is 4.2 cu ft. ya still need room for subs and port. you could get away with 3.6 cu ft net and perhaps a tuning of 35Hz. i would go with a 4" wide port 14.5" tall. please let us know your MAX dimensions

i believe he said those are his max dims!

loud-n-low
06-29-2009, 12:40 AM
lets bring on the flame...run em sealed

lovindabass
06-29-2009, 12:41 AM
I have 2 12" RE SE's and I want to build a ported box for my Tacoma extra cab.
Powered by a Sundown Sae1200d.
From what I have researched it should be 4 cu ft tuned to 33 hz and around 64 sq in of port.
I think I want sub up/port up or maybe sub front/port up.
Am looking for a dual port configuration either on the ends or in the middle.
Max dims are 49 w x 12 h x 16 d. Might be able to add a bit to the height.
Would like to see a sample of what it looks like. Also would like cut sheet.
I have something I might use from RE's sight but looking to see what other designs are available.

Let me know what you have and price.

no he can add 2 height

406er
06-29-2009, 12:45 AM
lets bring on the flame...run em sealed

ewwwwwwwwwwwwwwwww. worst case scenario i guess that would be OK, 3 cu ft sealed. perhaps 2 or 3 4" areos might work out

loud-n-low
06-29-2009, 12:47 AM
ewwwwwwwwwwwwwwwww. worst case scenario i guess that would be OK, 3 cu ft sealed. perhaps 2 or 3 4" areos might work out

i did it.dropped low as hell,with less power than he has and i have a trunk car

gearhound17
06-29-2009, 12:52 AM
lets bring on the flame...run em sealed

Funny.
I am currently running them sealed.

gearhound17
06-29-2009, 12:52 AM
I could probably go 49 x 16 x 16.
I get a larger dimension from RFs site as opposed to RE.
If I go 14 h x 49 w x 16 d on RF's site I get 4.98 cu ft.
And isnt sub displacement .07 for each sub?

406er
06-29-2009, 01:00 AM
I could probably go 49 x 16 x 16.
I get a larger dimension from RFs site as opposed to RE.
If I go 14 h x 49 w x 16 d on RF's site I get 4.98 cu ft.
And isnt sub displacement .07 for each sub?

49X14X16 could work

406er
06-29-2009, 01:09 AM
sub displacement is .15 each, on REs site i came up with a 3.9 cu ft tuned to 35. ive factored for sub diplacement, values are as follows

49
16
14
14
.75
4
11

enter all that **** in and youll get what i got

gearhound17
06-29-2009, 01:11 AM
My goal with this setup is to keep these subs and box out of the view of passers by.
I am trying to keep the box as far below my quarter windows as possible.

GAM3OVR
06-29-2009, 02:08 AM
My goal with this setup is to keep these subs and box out of the view of passers by.
I am trying to keep the box as far below my quarter windows as possible.

get an alarm sparkling wiggles!