PDA

View Full Version : Check these box specs



da box king
06-24-2009, 03:09 PM
This is all I could get out of the dimensions I have. Its for 2 new 12" RE XXX, off 4k.

I used re box calculator and it was off, compared to my box program.

My box programs specs were like this:
Inner box dim: 14.5" H x 33" W x 20.5" D =5.667 cu ft
Total dis of both subs: .48 cu ft

Port Dimensions: 14.5" H x 4.5"W x 27" L
Gives me a tuning of 36.16 hz.

Box will also be double baffled so take out another .179 cu ft
also 2 dowel braces (which dont equal to much)

I ended up with
3.99 ct net
65.25 sq in of port area
27" of effective port length
16.34 sq in of port are per cube
2.00 cubes/sub
36.16 hz

Techs at RE said 2-2.2 would be great for the subs...

what ya think?

audioarsonal
06-24-2009, 03:11 PM
Port lenght might be a little long but other then that looks good.

da box king
06-24-2009, 03:16 PM
thats what I was thinking. re's site seemed alot shorter

da box king
06-24-2009, 03:59 PM
bump

Skip01
06-24-2009, 04:03 PM
RE site *****. Get JBLcamry to do a design and cutsheet

iamamp3pimp
06-24-2009, 04:55 PM
i think its a bit small and tunes really high

i wouldnt tune those subs over 30.....,

da box king
06-24-2009, 05:29 PM
i think its a bit small and tunes really high

i wouldnt tune those subs over 30.....,

the fvckers at re keep sayin tune around 35 hz. They even said you wont hear anything lower than 28hz, at that point in the conversation I knew I should hang up.

The guy with the system will not get this metered, but he wan't it loud to the ear. So I'm guessing something murdering the lows would be his liking