PDA

View Full Version : Hu noise on ddx-812.



sparkplug121988
06-23-2009, 11:16 PM
I have a kenwood ddx-812 and I have a noise problem. Its not a whine its more like a fuzzy noise! When I turn my hu up and pause the track or whatever im playing you can really hear it. Its just a steady fuzzy noise. I have the big three done all grounds on the amps are good and the rca's are sheilded. What needs to be done? The hu is brand new and so is the amp, rca's, etc.....

sparkplug121988
06-24-2009, 01:29 AM
???

Doola36
06-24-2009, 01:44 AM
turn your SRS setting off or down......:)

sparkplug121988
06-24-2009, 01:51 AM
Anything else.

sparkplug121988
06-24-2009, 01:55 AM
I would like to figure this out.

chereck04
06-24-2009, 01:59 AM
I have the same unit, just tried what you did and nothing happened. My guess is it's in your settings or perhaps a bad ground point.

I had an old ddx-8019 and I got feedback like that when the unit was grounded to the stock harness, but when I gave it a good ground the feedback went away.

sparkplug121988
06-24-2009, 02:09 AM
Do you have the same problem with yours now?

sparkplug121988
06-24-2009, 01:55 PM
ttt

sparkplug121988
06-25-2009, 03:53 PM
bump

RXZILLA
06-25-2009, 04:25 PM
Take it back to the dealer you bought it from.

sparkplug121988
06-25-2009, 07:43 PM
I have found that most of the kenwoods do this. Their has to be someting to fix it.