PDA

View Full Version : Paying $10 Paypal for Enclosure Design



runteldat
06-22-2009, 06:39 PM
Like the title says, I'll be paying $10 for the best enclosure design. Should be simple - matter of fact, you probably have one lying around the house.

Subs: 2 15" MTX 9500 - Dual 4ohm VC
Picked up 2 15s in good condition w/prefab for $500 - thats why I chose the subs. Otherwise, I probably would have went with Fi BTLs.

Vehicle: 1999 Ford Expedition
Just my play around vehicle, so do what you need to do.
---------------------------------------

I currently have a crappy prefab box right now, MTX site says its like 36.5 hz +/- 3db!! I'm thinking more of 32hz.

Also, the box allows maybe 2.5 or so cubes for each sub, which I think is stupid.

---------------------------------------

I want someone to design an enclosure for me, giving each sub lets say 4-5 cubes each, tuned to 32hz. Using 1" MDF

Something that's going to fit in the truck.

Lets keep the width to around 42" and height you can play with I guess - but not too high so i can still see out of my rear view mirror. Maybe up to 20" for height.

I'm good for the paypal - visit the personal website @ www.burksfinancial.com

Thanks.

You can submit designs on the board, or email me at ceo @burksfinancial.com <--had to separate to prevent spam.

runteldat
06-23-2009, 01:46 AM
Bump - no replys - really serious. Box needed asap.

fasfocus00
06-23-2009, 01:51 AM
max diminsions? 20" height, 42" width, ??" depth

SPL-Master
06-23-2009, 01:53 AM
i have on that 40.5x20x27 but its 3/4 mdf

runteldat
06-23-2009, 01:55 AM
Depth is pretty much unlimited - its in an expedition. Whatever the depth will be, I can work with it. Its only 8cubes so it shouldn't be too much.

I'm actually willing to accept any dimensions for the box as long as it doesn't go over 45" width.

I think maybe that's why I've only had one reply lol.

DonH
06-23-2009, 01:56 AM
im here :D

i can design u a box right quick if you would like

SPL-Master
06-23-2009, 01:57 AM
i got a design for you if you can use 3/4 mdf its 8.2 ft^3 at 32hz with 120.25 square inches of port

runteldat
06-23-2009, 01:58 AM
i have on that 40.5x20x27 but its 3/4 mdf

What is that tuned to? Isn't that like over 11 cubes?

runteldat
06-23-2009, 01:59 AM
Can both of you email the designs to ceo@ burksfinancial.com?

I'd like to take a look at them.

DonH
06-23-2009, 02:00 AM
What is that tuned to? Isn't that like over 11 cubes?

no its 8.2 ft^3 @ 32hz... designed by me

DonH
06-23-2009, 02:00 AM
Can both of you email the designs to ceo@ burksfinancial.com?

I'd like to take a look at them.

there both my designs lol

runteldat
06-23-2009, 02:02 AM
lol ok - can u email them to me? Along with your paypal email address.

Are the subs facing toward the back or upwards?

SPL-Master
06-23-2009, 02:03 AM
there both my designs lol

sadly yes it is :( work is awesome tho : )

DonH
06-23-2009, 02:03 AM
lol ok - can u email them to me? Along with your paypal email address.

Are the subs facing toward the back or upwards?

the one thats 8.2 ft^3 is port back subs back

and as far as the one with 1" mdf havnt designed it yet... pm me and we can talk it over to make it exactly what you want

runteldat
06-23-2009, 02:07 AM
PMED! Thanks man.

DonH
06-23-2009, 02:10 AM
sadly yes it is :( work is awesome tho : )

i try! hey bro ygpm

DonH
06-23-2009, 02:39 AM
new design sent good sir!

runteldat
06-23-2009, 02:43 AM
Thanks! Paypal sent.

You have no idea how much I appreciate it.

DonH
06-23-2009, 02:46 AM
Thanks! Paypal sent.

You have no idea how much I appreciate it.

just let me know in my feedback thread :D