PDA

View Full Version : Sparkplug wires (which brand?)



jco1385
06-19-2009, 02:42 PM
It's that time, and i want to know what are your experiences? I'm looking at getting the Borg-Warner Select ones, and i want to know if they are any good. I currently have MSD wires and i have a very hard miss under load. any one want to chime in and give an opinion?

btw, car is my t-bird w/ 3.8l v6. i got new dist cap/button and plugs.

I Like Waffle
06-19-2009, 03:08 PM
Ive always been fine with the duralast ones. They are probably **** though.

jco1385
06-20-2009, 10:36 PM
i went with the B/W select for everything. wires/cap/rotor and now my miss is gone. :woot:

infamous_e46
06-20-2009, 10:41 PM
go to napa :sneaky:

CrownVicon24's
06-20-2009, 10:49 PM
I use motocraft plugs and wires they seem to do pretty good.

Blados
06-20-2009, 10:53 PM
I use motocraft plugs and wires they seem to do pretty good.

This

jco1385
06-20-2009, 10:53 PM
I use motocraft plugs and wires they seem to do pretty good.

meh. didnt have the coin for those. these are nice though.

SpringfieldOhio
06-20-2009, 10:58 PM
i have a 94 t bird and i run bosch wires and they work real good for me and yet still pretty cheap

jco1385
06-20-2009, 11:01 PM
i hear bad things about bosch. i run autolite double plats and now i have pretty decent **** as far as wires and ****. i got a lot more power than i had, and not a miss. **** aint been like this for a hot minute.

99grandprixGT
06-20-2009, 11:03 PM
ac declo for me. got them cheap with a coupon and autolite plugs.

DBfan187
06-21-2009, 12:08 AM
Motocraft

jdawg
06-21-2009, 12:27 AM
best wires i ever had
http://www.auroraelectronics.com/Wire%20Sets.htm
6 cyl set is about $80 shipped, 4cyl about $70
http://auroraignitionwires.com/index1.html