PDA

View Full Version : Walling of my integra



jmkanek
06-16-2009, 02:46 PM
im seriously considering building a wall in my 95 integra, im thinking of either going 2 18s 4 12s or what i wanna do is put 4 15s if i have the room, box will be close to 18 cubes gross or somewhere close to that, does anybody think i could fit 4 15s on the front with a nice port, or should i just get 4 12s or 2 18s. any help would be greatly appreciated.

Mr. Slate
06-16-2009, 02:50 PM
2 18s.

jmkanek
06-16-2009, 04:08 PM
prolly what ill end up with if i cant get 4 15s in there, ne one else??

jmkanek
06-16-2009, 04:28 PM
does anybody think its possible to fit 4 15s in an acura integra

TurdFergueson2
06-16-2009, 04:48 PM
Which 15s? and how much space are you looking at?

jmkanek
06-16-2009, 05:16 PM
audioque sdc2.5s, box will be around 18 cubes, walled off in the front and sealed along the sides on top of my car behind the b pillar, jus dunno if il have the room for subs and a big enough port on the face

Mr. Slate
06-16-2009, 06:36 PM
Here a picture of my buddies Integra:
http://i35.photobucket.com/albums/d171/nhk218/USACi10-5-08004.jpg

528hz
06-16-2009, 06:41 PM
^^^^Is that space above the subs the port?

jmkanek
06-16-2009, 07:24 PM
is at 15s man if so then theres no way ima get 4 back there, lol have to stick wit 4 12s or 2 18s

ChedNompton
06-16-2009, 09:14 PM
I'm having a hell of a time fitting 4 15s in my Integra (SDC2.5). So far by walling i get around 200 sqin of port and 16.4 cubes, but its got a lot of weird angles. I've also done a "half wall" with subs up port up/back/forward. If I where you I'd go with the 2 18s for the lack of a headache. If your wanting to wall it, I'd go with the 4 12s as the dimensions seem to be better (to get above 32" width in my teg requires some stupid angles).

Good luck,
Larson

mlstrass
06-16-2009, 09:40 PM
Took a LOT of work to fit 4 15's in my Altima, but it was worth it.

You need to rip everything out and start getting some measurements to see if you have enough baffle for the subs and port as that's the hardest part to make fit.

jmkanek
06-16-2009, 10:03 PM
yea thas whats really getting me is the baffle, i know i can get enough airspace, but the daggon baffle on front is goin to be a pain, getting the subs and a big enough port to all fit, if i do wall it off im going from the rear floor boards to the headliner and sides, and sealing it off from the hatch. which its gonna take a long while for sure to get all the supplies and design, and equip together for this project, i was goin to go with 4 sdc 2.5s also in here, but a buddy of mine may sell me his 2 dd9518s, and if i can grab them from him for a good price then ill def go wit the 2 dd 18s

jmkanek
06-16-2009, 10:22 PM
hey chednompton, where abouts are u locating ur subs and port in ya wall man, like where are you getting the room and everything best at of placement, any help is greatly appreciated

ChedNompton
06-16-2009, 10:39 PM
hey chednompton, where abouts are u locating ur subs and port in ya wall man, like where are you getting the room and everything best at of placement, any help is greatly appreciated

Let me grab a picture real quick to show ya how my wall looks.

mlstrass
06-16-2009, 10:41 PM
Did 2 DD 18's in a Caddy a few months back and it's a loud *** daily driver and wasn't hard to fit, but his car is much wider...

jmkanek
06-16-2009, 10:52 PM
Let me grab a picture real quick to show ya how my wall looks.

aight awesome man

jmkanek
06-16-2009, 10:53 PM
Did 2 DD 18's in a Caddy a few months back and it's a loud *** daily driver and wasn't hard to fit, but his car is much wider...

cool, im hoping i can pick two of them up at a good price

S.B.C.
06-16-2009, 10:56 PM
Here a picture of my buddies Integra:
http://i35.photobucket.com/albums/d171/nhk218/USACi10-5-08004.jpg

:laugh:

No wonder you guys dont get loud..

Anyway, port in middle- vertical between 4 15's-

ChedNompton
06-16-2009, 10:58 PM
http://i885.photobucket.com/albums/ac57/ChedNompton38/Wallbox21016.jpg

How it fits in the car.
http://i885.photobucket.com/albums/ac57/ChedNompton38/Wallbox21036.jpg

The face is 32x40, Port is 8x25.5 (204 sqin) tuned to 38. Just got it installed today, and I'm not very happy with it, I need to mess with it a lot.

jmkanek
06-16-2009, 10:59 PM
pics not workin bro

jmkanek
06-16-2009, 11:02 PM
now they working, looks like ya got an awesome start on it man, looks good

jmkanek
06-16-2009, 11:42 PM
hmmm... i may just stick with 4 12s should still be quite loud, should i jus pick up 2 more orion hccas, and run four hccas. or would i have enough power to run 4 hccas.

jmkanek
06-17-2009, 10:38 AM
welp i did some more measuring and figuring, and the more i think about it the more id like to get 4 15s in there, it will def be a tight fit but im pretty sure i can get em in there. ill start a build log once i get everything together and start on this project it will be a while tho gonna get each sub one at a time.

jmkanek
06-17-2009, 10:48 AM
so now should i get four sdc2.5 15's or should i save a lil bit longer and more to get 4 hdc315's, would it be worhth it to keep saving and get the big audioques.

ChedNompton
06-17-2009, 12:25 PM
so now should i get four sdc2.5 15's or should i save a lil bit longer and more to get 4 hdc315's, would it be worhth it to keep saving and get the big audioques.

I say go with the HDC3s, seems we always wanna upgrade, might as well get them now and save yourself the hassle. Make sure to keep us posted with plenty of pics when this happens.
Good luck,
Larson

jmkanek
06-17-2009, 12:33 PM
hmm. if i can come up wit the extra money ill def go with the hdc3s if not ill get the sdcs, but ill def keep pics updated and stuff when i get this thing started, it will be a while tho gotta get all the supplies and subs in. prolly be later on this summer