View Full Version : Figuring out hz tuning of enclosure?
Staninator
06-09-2009, 10:27 AM
Hey guys how do I figure out what hz my enclosure is tuned at? It is dual 12" sealed and here is the link to it:
http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=20117
Thanks!
dman4486
06-09-2009, 10:31 AM
sealed isnt tuned to anything. are you asking what frequency your subs peak at in that box?
^^That....there is no tuning frequency for a sealed enclosure
Staninator
06-09-2009, 10:32 AM
Well what I want to do is configure my amp for optimal performance. And I was to do the -3db test tone and I need to figure out at what hz I need to download it and play it.
dman4486
06-09-2009, 10:33 AM
Well what I want to do is configure my amp for optimal performance. And I was to do the -3db test tone and I need to figure out at what hz I need to download it and play it.
anything below your LPF and above your ssf will work...
LoggedOut
06-09-2009, 10:35 AM
very vague
Staninator
06-09-2009, 10:35 AM
no idea. what subs/amp/car do you have?
I have a 1200w brutus amp and 2 12" 500 rms zeus subs on an 01 honda civic.
Staninator
06-09-2009, 10:38 AM
i would just use a tone around 35-45 hz.
but i think there are other (easier) ways for setting gains too.
I've been researching this **** and if you could enlighten me on easier ways then go for it.
dman4486
06-09-2009, 10:38 AM
I have a 1200w brutus amp and 2 12" 500 rms zeus subs on an 01 honda civic.
that is not tunable....civics just have too much power for car audio.:fyi:
dman4486
06-09-2009, 10:39 AM
I've been researching this **** and if you could enlighten me on easier ways then go for it.
by ear...
Staninator
06-09-2009, 10:48 AM
Alright guys thanks!