PDA

View Full Version : Need some suggestions and a design



Abarca
06-03-2009, 03:32 PM
what i have and the MAX dimensions
(2) 15" RE Audio SEs
L = 48"
H = 20"
W = its in an avalanche so its not a problem

RE Recommends 8 cubes tuned to 34Hz. so thats sorta what im shooting for unless anyone else has had experience and says to tuned a lil lower. Ive build simple slot ported boxes w/ common chamber before but i would like to do something a tad different. im not shy about building a box with aero ports or slot in the middle, dual slots w/out common chamber. if you have any suggestions please throw them out there. Thanks everyone!

SPY
06-05-2009, 09:02 AM
I'd tune down to 30-32hz


As far as looks there is a lot you can do. duel kerfed ports (center or out side edge) always look good though.

Abarca
06-05-2009, 10:14 PM
any reason for tuning lower? just to get more low end?