PDA

View Full Version : Designed Box with Google Sketchup and RE calculator



Nut Hair Trick
05-28-2009, 04:16 AM
For under rear seat of 2007 F150 SuperCrew

This is what I've come with. I have a 10" DD (model1010) on the way and I have been studying this stuff way too much. I spec'd it out with the RE enclosure calculator but I still have to figure in driver displacement and any additions I made to the box to make up for that. It measures 51x6x10x19. It has 20sq" port area 23' long tuned at 37hz. Now, this is my first box design so please grill me if needed because I want to get it right, ie different port placement, port size, enclosure size etc.
http://i47.photobucket.com/albums/f166/fullyinvolved/DDbox.jpg
http://i47.photobucket.com/albums/f166/fullyinvolved/DDbox1.jpg
http://i47.photobucket.com/albums/f166/fullyinvolved/DDbox2.jpg

Nut Hair Trick
05-28-2009, 04:19 AM
What I'm thinking is I might have to extend the top piece to 12" from 10" to allow room for the sub. If I do that, I will have to take it down in height by 1/4 of an inch. Other than that, right now that's the only thing I have planned to change.