PDA

View Full Version : Please help me with my box... 10"CVRs



kappout
05-27-2009, 06:22 PM
Hey yall, I have two ten inch kicker CRVs that im wiring up to an Alpine M650.

I have ample trunk space so theres no limit there. Anyone have some box design suggestions?

Thanks

nineball
05-27-2009, 06:23 PM
maybe if you looked at the stickies in the section before posting you would have your answer.

kappout
05-27-2009, 06:27 PM
maybe if you looked at the stickies in the section before posting you would have your answer.

wanting something differnt.

kappout
05-27-2009, 07:01 PM
noobie question... would I benefit from a multi chamber box?

kappout
05-27-2009, 08:28 PM
does anyone know where i can find the specs for these to enter into the winISD beta program? or will the info from the owners manual due?

Bullet03
05-27-2009, 11:58 PM
almost everything should be in the O/M, id go with 2.5 cft per sub sealed, or 1.5 cft. per sub ported.

Jer510
05-28-2009, 12:03 AM
Recommended Sealed Box Volume:

* Compact (minimum enclosure volume): 0.8 cu/ft; the woofer can handle up to 300 watts RMS (150 watts per voice coil)
* SQ (maximum enclosure volume): 3 cu/ft; the woofer can handle up to 300 watts RMS (150 watts per voice coil)

Recommended Vented Box Volume:

* Compact: 1.25 cu/ft; 2" x 10.5" port opening; 20" port depth; the woofer can handle up to 200 watts RMS (100 watts per voice coil)
* SPL/Deep Bass: 1.75 cu/ft; 2.5" x 10.5" port opening; 20" port depth; the woofer can handle up to 200 watts RMS (100 watts per voice coil)


from crutchfield. I got the same subs powered by a Kicker 750 and it pounds

Bullet03
05-28-2009, 12:10 AM
well atleast one of us could get crutchfield to load..

kappout
05-29-2009, 12:19 AM
i went with a simple 1.7 sealed box. it ran the best numbers by the math for the sound im looking for. thanks yall