View Full Version : need some kind of rubber mounts for my amps
05-20-2009, 10:49 PM
i only have room in my astro build to mount the amps on the back of the box.I'm looking for a way to mount them on a full peice of mdf then mount the mdf to rubber mounts on the box. any ideas:confused:
05-20-2009, 10:50 PM
thick rubber small ruber condoms what? like beaker stops or little rubber grommets
05-20-2009, 10:52 PM
Lowes'....................rubber plugs. They have assorted sizes.
05-20-2009, 10:59 PM
needs to be something solid. if I screw though rubber plugs into the box it dont work. its like using motor mounts then bolting the motor strait to the frame.
05-20-2009, 11:03 PM
Would it work if you bought a small sheet (4" x 3") of rubber from HD, then layered it according to your needs?
05-20-2009, 11:25 PM
You could try getting about 2" of rubber hose, cut it into 4 1/2 pieces, Cut a piece of MDF the size of the back of the box. Drill a hole in every corner. Put a screw in each hole, then on the other side put 1 piece of hose and mount to the box?
That's a little idea i had in mind, not sure if it would work/ something you'd want to do.
05-21-2009, 08:06 AM
well i dont want anything that is ridgid going from the box to the amp rack.