PDA

View Full Version : 4 shallows in siverado, need answer on box design.



mlocke32425
05-19-2009, 11:46 PM
each sub calls for 1 ft. got all the specs for the 4 ft. needed just wondering if i should make it chambered or all one chamber. is 4 ft. with no divider to much space for all the subs, or would it sound better that way?

TNTR70
05-19-2009, 11:49 PM
all one chamber but with braces inside for support

Supergumby5000
05-19-2009, 11:51 PM
is this sealed or ported?

If sealed, separate chambers.

If ported, you can get away with one chamber

budahbuddy803
05-19-2009, 11:51 PM
if you can, i would go ahead and separate each chamber. If one sub happens to fail it could interfere with the others if its common chamber. For "bracing" and safety i would separate each chamber.

mlocke32425
05-20-2009, 12:05 AM
its sealed enclosure. so 4 seperate chambers or can 2 subs share a side

TNTR70
05-20-2009, 12:07 AM
usually there is a small hump in the middle of the floor which makes it hard to get 4 chambers all the same size but two per chamber divided right in the middle would be ideal

gotparts90
05-20-2009, 12:10 AM
2 subs or all could share but the best is to separate all of them in case o ****. and you can use thinner wood in between to keep it lighter on something that small. Hell build the whole thing in half inch why bother with 3/4 for that. of course people will yell o but use 3/4 oooooo or it will go poop. that small of panels it will be plenty stiff.

Supergumby5000
05-20-2009, 12:11 AM
usually there is a small hump in the middle of the floor which makes it hard to get 4 chambers all the same size but two per chamber divided right in the middle would be ideal

no, that is not ideal.