PDA

View Full Version : looking for someone to do a box design for $



fatboyracing
05-17-2009, 07:35 PM
I am looking for a box design I would like a buleprint

let me know price or what not

I want to use areo ports and have never done this before I have not bought the ports yet so I will use the size that you design to it is for a dd 9512g

my max h is 13.5 in
max w is 30.5 in

as far as depth goes what ever but the less the better
(ideal would be useing the h and w max and the smallest d)




digital designs specs

Series 9500g
Voice Coil Diameter 3"
Magnet Weight 406 oz
Power Handling RMS/Peak 1500/6000
Suspension 80 mm
Nominal Impedance .5 - 4.0 Ohm
DC Resistance .5 - 3.6 Ohm
Model 9512g
Rec Box (cubic ft) 2.6
Port Area (sq in) 52
Port Length (inches) 18
Free Air Resonance 34 Hz
Qts 0.31
Qes 0.33
Qms 4.15
Vas 35L
Sensitivity 89 dB

PaulThompson229
05-17-2009, 07:39 PM
Be sure if you do build a box close to max W & H that you will still be able to fit the box through the trunk opening.

fatboyracing
05-17-2009, 08:15 PM
ya thats my max to fit into the trunk

fatboyracing
05-17-2009, 09:58 PM
no one I figured this would go fast I am willing to pay

Mike465
05-17-2009, 10:20 PM
If you still need this Pm me and I can get it to you fast.

fatboyracing
05-18-2009, 09:16 PM
I pmed you