PDA

View Full Version : wall box port placements?????????



rickymac21
05-12-2009, 01:10 AM
so the theory is that with a wall the port should be on driver side to be loudest on the mic... well what about to the ear for every day ground pounding bass??? does it make a difference? say 4 15s??
- port down the middle with 2 subs on each side?
-port driver side
-port passenger side?
-port top
- bottom?>?????

whats best for daily if there is a difference

csu87
05-12-2009, 01:11 AM
do 2 ports. one on each side. maybe?

05_ZX636
05-12-2009, 01:12 AM
i would like to know also, I just had box designed that is 2 18s with port across the top all forward to replace my box thats subs up, port back

rickymac21
05-12-2009, 01:12 AM
do 2 ports. one on each side. maybe?

yea thats always an option... you have experience with this??? not doubting your suggestion. just want the best way to go

pokey_159
05-12-2009, 01:14 AM
i make tube ports! 4'' and 6'' what ever length you need them...hit me up

csu87
05-12-2009, 01:14 AM
ive seen it done with 6 15s. It sounded pretty good to me but it was in a Tahoe and had a **** ton of box volume

rickymac21
05-12-2009, 01:15 AM
i make tube ports! 4'' and 6'' what ever length you need them...hit me up

yea. i make them too... typically aeros arent used in walls though... thanks for the offer.

rickymac21
05-12-2009, 01:16 AM
ive seen it done with 6 15s. It sounded pretty good to me but it was in a Tahoe and had a **** ton of box volume

yea.. well im doing 4 15" memphis pr's and probably not that much volume seeing they dont need that much. probably 3 cubes per sub tuned to 36 hertz.

csu87
05-12-2009, 02:06 AM
what kind of vehicle is it going in

rickymac21
05-12-2009, 08:33 AM
what kind of vehicle is it going in

93 subaru impreza hatchback .... enough room for about 18 cubes roughly

BassMechkanic
05-12-2009, 09:42 AM
i would do either port across top or down middle, keeping the area infront of the port to the windsheild unobstructed as possible.

mlstrass
05-12-2009, 01:09 PM
I just did a wall with 4 15's and did port down the middle as it adds bracing to the box and since it's a daily set up numbers don't matter...