View Full Version : type R encloser help also plans
04-28-2009, 08:32 PM
ok well normally i build enclosures for my spl cars well a friend of mine has 2 12" type R's in a SEALED box,, not sounding very good, so i told him ill make him a new one,, now i see on here ppl asking about type r boxes,, but i dont think i saw one for 2 12" not the car is a chevy blazer if and one has a blazer with type r chime in please,, but if you guys can help me wipp something up that would be great thanks
04-28-2009, 08:36 PM
Just had one built for a Suburban if you would like to see the specs, lemme know. Although a Blazer is smaller.
04-28-2009, 08:48 PM
yea man ill check it out, pm it if you want
04-28-2009, 08:54 PM
04-28-2009, 08:59 PM
I'll do it for $100, I'll also use my brain and not some calculator....:p:
Seriously. If you want to learn how to build/plan/layout a box from scratch, I'll teach you so you won't have to start another thread like this.....just gimme a PM
04-28-2009, 09:07 PM
thanks for the help man,, just to wide
04-28-2009, 11:42 PM
3.531cu ft internal
32” wide x 14” tall x 17.5” deep
Port = 12.5” tall x 3.5” wide
Length will be an L on either side : 12.5” deep and then 3.75” behind each sub
it will make them sing I promise.
you can adjust ports as necessary but I have tried lower and higher on dozens of R's and 38 gives them awesome bottom end and very clean all around bass. it is mean and very loud.
04-30-2009, 06:15 AM
05-02-2009, 03:32 PM
anytime bro. I hope it works for you well. that box design has served me very well for 100's of installs.
05-02-2009, 04:28 PM
4.25 tuned to 34-38hz is what i found to work nicely with 2 R's. sub up, port back in a blazer.
05-02-2009, 04:32 PM
ive done them bigger and smaller both and that design retained alot of the snappy punchy bass from kick drums ect while still hitting as low as 24hz, whereas a bigger box loses its punch some.