View Full Version : 09 Accent Hatchback, where should i fire ports/sub?

04-28-2009, 01:00 PM
any suggestions? never built a box, this is gonna be my first attempt. I'm sure I'll go through a couple differn't boxes and test differn't firing directions but I was hoping someone here might have some good insight on how they should be firing for the best performance in this application.

This is gonna be a ported daily driver setup, 12 RE XXX w/ roughly 2k+ watts.

04-28-2009, 01:02 PM
sub up, port back is always a viable option...

04-28-2009, 01:04 PM

works very well in almost every hatch

04-28-2009, 01:07 PM
good enough for me, i'll try that setup first, thanks for the quick replies!

04-28-2009, 01:07 PM
Sub up with the port firing back.

04-28-2009, 01:09 PM
good enough for me, i'll try that setup first, thanks for the quick replies!

no problem...take pics and make a build log for our enjoyment :D

04-28-2009, 01:18 PM
will do, i'm sure my first box project will give you guys alot to chuckle at :D
it's gonna be about a week or so before i get started on it though~ but i will be back with laughable pics :D

04-30-2009, 07:11 AM
if you look at back at some of my threads i have videos of my 2002 accent ,, i did a 150.2 right before i sold it,, amp went in the spare tire well,,,, and yea subs up port back,, o and i was doing 2100 watts per 12 and it for for a 2 12 set up street b in dbdrag

04-30-2009, 11:16 AM
I'm building my 09 hatch for only spl but so far it's sub up and port to the drivers side. I don't think there would be enough room in the hatch to port it back