PDA

View Full Version : BOX design and cutsheet 4 12" RE SE in JIMMY



jdubbau
04-20-2009, 12:31 AM
I need a design and Cutsheet as soon as possible for this please the sooner the better! Willing to spend up to $20 or so if it can be done by tomorrow afternoon at the latest.

1. Car. Year, Make, Model:GMC Jimmy 2000 4 door suv


2. Subs. Make, Model, Size, How many: X4 RE AUDIO SE 12's


3. Power. How much power per sub: Around 750 wrms or more


4. Goal. SPL or SQ: SPL MOSTLY with ok to good sq


5. Sealed or ported: Ported


6. Sub/port placement: BEST suited for SUV open to ideas have always heard subs up ports back but have seen some designs with subs up and ports up. OPEN TO EITHER


7. Max dimensions: 39 IN Width, 30 Inch Deep (ports back), 34 Inch Deep Ports UP, 17.25 Inch Tall Subs Recessed, or 16.5 reg mount. (have to make sure under top of back seat meca rule?


8. Desired NET vol and tuning(optional): AS MUCH AS POSSIBLE with room I have and tuned to 42-45 HZ
Using 6 inch PVC to PORT and round over wood with router to acheive aeroport like design. Use as many ports as possible for best performance.

9. Finish: WOOD with Rhino line or Fleck paint


10. Zip code for shipping:
Just need DESIGN and CUTSHEET

11) Additional comments:
I just need Design AND CUTSHEET AS SOON AS Possible.



Double baffle:If Possible
Double baffle/flush mount:If possible
Round over all port edges inside and out:YES
Round over all outside edges:Yes
45's in all inside corners:Yes
Kerfed port:NO
Kerfed walls:
Slanted back:no
Paint inside of port:yes

Cravingbass123
04-20-2009, 12:33 AM
yo i was gonna do 4 12 se's

but instead i didz 3 15's since im baller status.

u should too.

its bettas

jdubbau
04-20-2009, 12:34 AM
Oh I will most likely be using 1 1/8 inch MDF as my wood for the build.

jdubbau
04-20-2009, 12:36 AM
Depends on what your hittin? Mine is wangin pretty good now with a box tuned way to low, not big enough, and thrown together to quick.

Impatient and wanted to here it now building another, seems like a common reoccuring thing I do that may be why the trash guy hates me cause he is picking up 2-3 speaker boxes a month.

jdubbau
04-20-2009, 12:44 AM
Anyone?????

jdubbau
04-20-2009, 01:02 AM
Come ON anyone with some skillz to throw this down for me? Like I said I am willing to pay for the rush and the work. JLMK

jdubbau
04-20-2009, 08:32 AM
Help???

iamamp3pimp
04-20-2009, 08:42 AM
sure.

jdubbau
04-20-2009, 09:07 AM
Let me know you paypal addy and I will send the cash if you can get me the design and cutsheet before late this afternoon?

iamamp3pimp
04-20-2009, 09:52 AM
ygpm

jdubbau
04-20-2009, 09:03 PM
Sent payment and of requested amount and $5 more earlier today. Let me know when you have them done Iamapimp I am anxious to see what you come up with so I can get started.

jdubbau
04-21-2009, 11:15 AM
Well is anyone else availabe to throw this together for me today soon???

I needed this like yesterday but was unable to get it completed. Please let me know if you are able to and paypal id so I can promptly pay and get the blueprints and cutsheets.

S.B.C.
04-21-2009, 11:19 AM
ygpm

iamamp3pimp
04-21-2009, 11:29 AM
you said you had someone with it designed already, so i refunded you bro...

if i knew you didnt have someone id have done it before work this morning....

lol

jdubbau
04-21-2009, 11:44 AM
yeah its not iamapimps fault as i paid him late and he was out the rest of yesterday afternoon. So that did not work out then I had another person on another site that told me they had it ready or would have it to me in 1 hour. After I tried getting back with them last night and this morning NO RESPONSE. So I am back at square one and need the design and cutsheet still.

iamamp3pimp
04-21-2009, 11:47 AM
well resend it and ill get you this afternoon, after i get home from work.

jdubbau
04-21-2009, 02:17 PM
No Worries I think RIO now has me taken care of but thanks again and sorry for any troubles.

iamamp3pimp
04-21-2009, 02:59 PM
cool.

lmk if it doesnt work out though.