09-15-2003, 10:11 PM
After getting my materials and finally deciding on my design, I'm ready to start building my box. What will I need to build a functional box, anything that has to do with liquid nails, sealer, any wiring situations that might arise, or any help with the general building of a box would be greatly appreciated.
09-16-2003, 12:24 AM
3/4" MDF ( Medium Density Fiberboard )
2" Drywall Screws (or Liquid Nails if you prefer)
Bondo Body Filler , Silicon , or Culk
Plans, Patience, and Precision.
That's about all you need to build a functional box.
Im sure u know that u need to tools to work with these things properly like Skillsaws, table saws, culk and silicon appliers, and screwdrivers... but i just thought i might mention it while i am typing.
Plans: Besure to double check your plans and drawouts there is nothing worse than cutting all your MDF up and then the pieces not fitting together.
Patience: Don't rush things, when you rush thats when fingers get lost. :banghead:
Precision: Try and make straight cuts, im usualy precise down to about 1mm. but don't get all freaked out if it's off by about a centimeter (~1/3").. you can fix that later.