PDA

View Full Version : Any DEI alarm installers?



Tirefryr
04-04-2009, 04:17 PM
I installed an Avital Avistart 4400 today and I'm having a simple problem. I am just using the alarm features, so I did not hook up anything for remote start. Upon testing the unit, when I open the door, it activates and the display on the remote shows door intrusion. I cannot get this to stop even after disarming the system. Do I have to have the remote start hooked up so it will read an ignition cycle and reset the alarm so my LED stops blinking and remote shows normal status? Thanks in advance.

Worlddre
04-04-2009, 05:49 PM
Yeah you need to wire up the ignition. You can use the yellow wire in the ribbon harness as your ignition input.

Tirefryr
04-04-2009, 11:24 PM
Thanks, that's what I ended up doing and worked.

Worlddre
04-04-2009, 11:27 PM
werd playa