PDA

View Full Version : 10w1 measurements



Kool
04-03-2009, 05:29 PM
Each chamber is gonna be 18" wide, 18" deep, and 15" tall.
Which will make it 2.81 cu. feet per chamber which will make the entire box 5.62 cubic feet. Is that way too big for 10's?

Vermithrax
04-03-2009, 08:00 PM
If you're talking sealed then yes. Go to JL Audio's wesite and get the proper specs. Or model them in WinISD.

thevic24
04-03-2009, 08:03 PM
thats too big for sealed or ported for the 10w1's.
sealed they are .625 cuft each
ported they are 1.125-1.25cuft each

Kool
04-05-2009, 05:48 PM
It's gonna be ported

Kool
04-05-2009, 10:57 PM
**** it, I'll just duplicate my last box

406er
04-06-2009, 12:40 AM
WAYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY TO BIG. just build the box to JL spec. you last box was too big as well. 2 cu ft per driver is too much for a 10 dude

Buck
04-06-2009, 12:42 AM
Buy two more. That'll solve the problem :)

KyleBechtold
04-06-2009, 12:44 AM
those are very low power/ small enclosure subs.. if you have the room buy more.. they are cheap..