View Full Version : 10w1 measurements

04-03-2009, 05:29 PM
Each chamber is gonna be 18" wide, 18" deep, and 15" tall.
Which will make it 2.81 cu. feet per chamber which will make the entire box 5.62 cubic feet. Is that way too big for 10's?

04-03-2009, 08:00 PM
If you're talking sealed then yes. Go to JL Audio's wesite and get the proper specs. Or model them in WinISD.

04-03-2009, 08:03 PM
thats too big for sealed or ported for the 10w1's.
sealed they are .625 cuft each
ported they are 1.125-1.25cuft each

04-05-2009, 05:48 PM
It's gonna be ported

04-05-2009, 10:57 PM
**** it, I'll just duplicate my last box

04-06-2009, 12:40 AM
WAYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY TO BIG. just build the box to JL spec. you last box was too big as well. 2 cu ft per driver is too much for a 10 dude

04-06-2009, 12:42 AM
Buy two more. That'll solve the problem :)

04-06-2009, 12:44 AM
those are very low power/ small enclosure subs.. if you have the room buy more.. they are cheap..