need a sketchup from someone who has some free time...

[allout13]

can someone make this...

http://i74.photobucket.com/albums/i258/allout13/sketchuphelp.jpg



...look like this?
http://i199.photobucket.com/albums/aa183/used2know/Designs/DC%20Sound%20Lab%20DC%2015Lv4/3cuft34hz5075in2.jpg

I downloaded google sketchup and I can figure that **** out so I really need help haha
Id really appreciate it if someone could do this for me

thanks,
Chad

[tommyk90]

I'm on it.

[tommyk90]

Question, is the TOTAL height 10.75" or just without the double baffle on it?

[SSS 18734]

There's a tutorial on here on how to use sketchup. You should search for it and give it a try. It's really not very difficult at all, especially for simple boxes like that. Make rectangles, and push them out.

[Twistid]

I accept paypal donations


http://img10.imageshack.us/img10/9318/58458490.jpg (http://img10.imageshack.us/my.php?image=58458490.jpg)

[allout13]

Question, is the TOTAL height 10.75" or just without the double baffle on it?

13" total

10.75" without the bottom or double baffle

and thanks a lot man

[allout13]

There's a tutorial on here on how to use sketchup. You should search for it and give it a try. It's really not very difficult at all, especially for simple boxes like that. Make rectangles, and push them out.

I saw the tutorial, but I think Im missing some of the very basic concepts not mentioned in the tutorial. I couldnt figure out how the make the rectangles the exact length that I wanted them :confused:

[tommyk90]

I saw the tutorial, but I think Im missing some of the very basic concepts not mentioned in the tutorial. I couldnt figure out how the make the rectangles the exact length that I wanted them :confused:

There's a little box in the bottom right corner of the screen.

When you start a rectangle, click in that box and type in the dimensions you want, for instance: 26", 30"

Yes you have to use the inch marks and a comma.

[SSS 18734]

If you set it up to woodworking/carpentry, you don't even have to do that! I personally don't really like the rectangle tool.

Just start guiding a line in the direction/plane you want, then, without even clicking in the little box, type your desired dimension (in inches) and click enter.

You can type it as 12.5 or 12 1/2 and it will automatically create the line with that exact length for you.

[allout13]

There's a little box in the bottom right corner of the screen.

When you start a rectangle, click in that box and type in the dimensions you want, for instance: 26", 30"

Yes you have to use the inch marks and a comma.

cool, that helps a ton.

now how do you make it show the measurements?

[tommyk90]

Do you want the baffle on or off?

[allout13]

Do you want the baffle on or off?

off would be good

[tommyk90]

Basic layout. Can't get the baffle separate though.

http://i17.photobucket.com/albums/b78/tommyk90/box%20designs/single15single8port.jpg

[SSS 18734]

cool, that helps a ton.

now how do you make it show the measurements?

Tools > Dimensions

[allout13]

Basic layout. Can't get the baffle separate though.



looks awesome, but is there anyway that you can change the angle to look at it a little bit more from the side?


Tools > Dimensions

got it. thanks!

[tommyk90]

Which side do you want to see more?

[tommyk90]

http://i17.photobucket.com/albums/b78/tommyk90/box%20designs/single15single8port-1.jpg

[allout13]

http://i17.photobucket.com/albums/b78/tommyk90/box%20designs/single15single8port-1.jpg

thats the side! thanks again for everything :D:D

[tommyk90]

No problem.

[allout13]

how do you draw the 45's?

[tommyk90]

how do you draw the 45's?

Draw two parallel lines and pull it up like you do a side.

[allout13]

Draw two parallel lines and pull it up like you do a side.

how did you draw it to the length I asked for? ...or did you just enter that length in when you showed the dimensions?

[tommyk90]

I just winged it and it ended up being 3.25" long. :D

[bassman_soundki]

If you set it up to woodworking/carpentry, you don't even have to do that! I personally don't really like the rectangle tool.

Just start guiding a line in the direction/plane you want, then, without even clicking in the little box, type your desired dimension (in inches) and click enter.

You can type it as 12.5 or 12 1/2 and it will automatically create the line with that exact length for you.

How do you set it up for woodwork? I dont see options for that. Thanx

[allout13]

How do you set it up for woodwork? I dont see options for that. Thanx

when you open the program. go to choose template and then pick product design and woodworking