PDA

View Full Version : ?'s for box for 96 ford explorer



on1wheel01
03-22-2009, 09:37 PM
Well I am building a box for a guy at work. He has two American pro ws-9012 600 watts yea I kno they are crappy as they get but it's what he has. They are currently in a garbage band pass box. And I figured if I get em in a ported it should sound way better(or should I go sealed?). He is not looking for a heavy hitting system(lets be honest it's just not gonna happen). They are being powered by a small mtx thunder 4 channel. But anyways on to the ?'s I am planning on building it 41" wide 14" high, and 15" deep, single chamber with a 3" wide slot port. It looks to be around 3 cubes tuned at 32hz. Would this be adequate cubes for the 2 12's as the web site does not say and I can't find the info anywhere. I am thinking subs up and port back(or should I fire both back). Does this sound about right? Any ideas or suggestions? Thanx a ton guys

ThatChevyGuy
03-22-2009, 09:44 PM
I would seal them, they will blow either way, but faster ported.

on1wheel01
03-22-2009, 10:04 PM
lol why say they will blow? they have been going strong for years

john denver
03-22-2009, 10:17 PM
sub up port back is loudest in mine id try at least 3.5 to 4 that way he can reuse the box when he gets better subs

on1wheel01
03-22-2009, 10:55 PM
well he's like 40 and i doubt he will be upgrading lol

Lakota
03-23-2009, 12:19 AM
Sub up port back.

on1wheel01
03-23-2009, 12:34 AM
ok thanx guys. So I am correct when I assume it should sound a hell of a lot better than the band pass. I am wondering if I should go with a shared chamber or dual

on1wheel01
03-24-2009, 03:03 PM
Well i called American pro they said 1.58 cubes each and 3x8" of port. They barely spoke English, American my ***...... So I guess the 3.4 cube box wilkl be fine after disp and all it should be right at 3.1 or so

on1wheel01
03-24-2009, 05:12 PM
thinking of doing the side port as on re calc. Not sure how hard the bottom port thing would be. Any diff in sound?