PDA

View Full Version : I can't decide AA or MAch 5



etznova
03-18-2009, 06:43 PM
OK well I plan i putting a 3 way set up in my truck and i can't decide which midbass to use I have both the AA carbon fiber mid and a set of Mach 5 MLI-65

For midrange i am putting a 4" TangBand in the dash with a Seas 25 something or other tweeter in the A pillar. Here is the Tangband woofer i have http://www.parts-express.com/pe/showdetl.cfm?Partnumber=264-828

Now from what i understand
The AA 6.5 POLY and Mach 5 MLI-65 are billed as High output, High Excursion, Low Distortion, Extended Frequency Response MidWoofers(Midrange/Midbass) drivers. Seems they both will play down to the lower midbass range (60Hz)and up to treble range.

I have very limited experience with the AA as i did have them in my previous car but they weren't XO over that low. I also have not played with the Mach 5's yet at all.

one point for the AA is that it will match the look of the Tangband
as you can see here
http://i5.photobucket.com/albums/y198/etznova/P3180445.jpg

here's a pic of the Mach 5 for reference
http://i5.photobucket.com/albums/y198/etznova/P3180446.jpg


Please give me your opinions

James Bang
03-18-2009, 06:54 PM
you have both.. now go try both.

etznova
03-18-2009, 06:55 PM
I figured i would but at the same time see what others opinions are

mcsoul
03-18-2009, 06:56 PM
Tough one, they both seem like good choices. I'd probably stick with the
AA poly mids and change them out later if I got the itch.

etznova
03-18-2009, 06:57 PM
the other point on the AA's is that they are closer to 7" and the mach 5's are 6.5"

mcsoul
03-18-2009, 07:15 PM
More mids for your collection on sale cheap :laugh:

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=299-042

etznova
03-18-2009, 07:18 PM
yeah those are actually on my list i saw those 2 weeks ago

not sure if i need them right now though

etznova
03-18-2009, 11:17 PM
any other thoughts

BigOso
03-27-2009, 04:08 PM
Use the mach 5 and sell me the Poly's :)