View Full Version : I think this will work?

03-17-2009, 05:48 PM
box width : 29"
height : 19"
box depth: 19"
port width : 3.8 [that will give me 36hz then become 38hz when i mount the subs?

wood thickness = .75
square port height = 17.5
square port width = 3.7
square port length = 14.55
square port length 2 =8
total port length=28.85
square port diameter =9.07977...etc
square port area= 64.75
square port volume internal : =1868.0375
square port volume displaced= 1884.3875
box volume =3.783
tuned freq= 36.039

thats with a port on the left side only, and the subs will be two audioque 12" sdc's

sound good for dnb?[drum n bass]

03-17-2009, 05:52 PM
and thanks to whoever linked me to the re audios page a while back

03-18-2009, 03:19 AM
not one mother ****er ?

03-18-2009, 04:42 AM
I've been known to have a mom or two everynow and then.

36 is low in my opinion. Try 38-40

03-18-2009, 04:51 AM
38-40 before or after the subs are in the box. mounting subs adds 2hz

also, is that going to be enough cubic ft for 2 AQ12's or should i make it bigger

03-18-2009, 05:08 AM

03-18-2009, 05:15 AM
i'd do more like 4.5 cubes and tune it to 38 hz.

03-18-2009, 05:25 AM
4.5 or moarrrrr?

03-18-2009, 05:37 AM
4.5 at 38hz

03-18-2009, 04:17 PM
now when you say 38hz, will that be 40 when i put the subs in? or vice versa?

I mean should i build the box to be 36 hz and then put the subs in and its 38?

03-18-2009, 04:36 PM
and also how can i build a box that will not hit thats rear seat mount in the middle of the floor?

03-18-2009, 06:12 PM
you should make the box a little bigger for the pair.

03-18-2009, 06:42 PM
sorry i doubled the thread. please lock this thead, and look here instead..