PDA

View Full Version : help on setup cdt or id or both?



jaytoofly
03-16-2009, 01:12 PM
so i was planning on running a set of CDT Audio EF-61NEO and a set of Image Dynamics CTX65CS up on the front. now i dont know if i should get 2 sets of the id or cdt's or one set of each put one in the door and other in the kick panel? which is better? also what kind of power would push these nicely? (open to suggestion)

cbrei1023
03-16-2009, 02:50 PM
Get one of the other... not both. Best idea would be combine budget and get some better ones or get an amp for them as well.

jaytoofly
03-16-2009, 03:10 PM
what would be better? between the two?

cbrei1023
03-16-2009, 03:16 PM
I havent heard either of them personally. I personally would get the CDTs. but I base that decision on nothing.

If you were considering 2 pairs of components per side though I need to say again to combine that budget and get some higher end ones. I dont see any benifit to running 2 sets per side.

Check out these

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=1118

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=7065

I had those rainbows before and can say they do sound amazing.

jrouter76
03-16-2009, 03:17 PM
Get one of the other... not both. Best idea would be combine budget and get some better ones or get an amp for them as well.

ID

jaytoofly
03-16-2009, 03:24 PM
ID

that's not too helpful... if there's really no benefit to running two on each side, what kind of 6x9 would be a good match for them in the rears?

cbrei1023
03-16-2009, 03:27 PM
I dont run a rear fill anymore but Ive used Alpine Type-S 6x9s back there and they sounded pretty good to me.

jaytoofly
03-16-2009, 03:31 PM
i'll probably stay with the pioneers that are back there from pevious owner.

mike11202
03-16-2009, 04:33 PM
ID's should have more midbass id go with them.. 150 watts x 2

stangman67
03-16-2009, 04:36 PM
Get the id's. The CDT neo midbasses aren't great.

jaytoofly
03-16-2009, 04:40 PM
aight cool

SWFL
03-16-2009, 04:45 PM
if u go with cdt step up to the 62 series or the HD series

exige
03-16-2009, 07:01 PM
Any specific reason you narrowed the CDT choice to the Neo's? Do you need to work with slim mounting depths? I would have chosen different CDT sets to look at if mounting depth is not a big concern.

jaytoofly
03-16-2009, 07:16 PM
Well I have a 97 eclipse, my I don't know the mounting depth exactly but doesn't look too big.