View Full Version : Need help finding out how to match sub with box...

03-16-2009, 12:37 PM
I am going to be getting 2 re se's and putting them in a sealed box. They need 1.0 cubes for optimal performance and have a displacement of .15 What other factors do I need to consider when doing dimensions for a box. For example, ideally would the SE work best in sealed box that was 1.15 cubes or are the other things I am not plugging in the equation that would make it a different number. Also, I read about some box calculation software called winisd and was wondering if anyone heard of this and thought it would help. I am new to car audio and want to get a good understanding of this issue because I know a box is very important. Hopefully, all you need to go by is the displacement but I am not sure. Any advice is much appreciated.

03-16-2009, 04:31 PM
I also read something about ts parameters and are not sure how that fits into the equation but if you can add that in with my post I would be very grateful.

03-16-2009, 04:33 PM
Sealed is a lot simpler than ported. Do 1.15 cubes per sub and you'll be good.