Check out this aero design...

[tapout383]

LMK what you guys think on how it would sound on a Fi BTL should be:
32"w x 16.5"h x 28"d
6.782 cubes total
6 cubes of airspace after sub and port displacement


ports will be flared...tuned to around 38hz

http://i44.tinypic.com/301282h.jpg

[bonesninja]

looks fun

[tapout383]

looks fun
wat ya mean

[IDSkoT]

wat ya mean

Looks.
Fun.

[tapout383]

Looks.
Fun.


:furious:

[bonesninja]

looks loud...hows that

[tapout383]

looks loud...hows that

sounds good ;)

[tapout383]

or should i do 3 4''s?

[bonesninja]

2 6"s = 56 in or so 3 4"s = 37 and some change

[tapout383]

2 6"s = 56 in or so 3 4"s = 37 and some change

thanks man, btw the ones for $37 from parts express how do i get the 15 inch tube i need it says i can create a port up to 17'' long...would i use pvc at a local lowes or do the cut it or what?? thanks again

[bonesninja]

thanks man, btw the ones for $37 from parts express how do i get the 15 inch tube i need it says i can create a port up to 17'' long...would i use pvc at a local lowes or do the cut it or what?? thanks again

that middle section comes with it

[tapout383]

that middle section comes with it

so the middle is 17'' long i just cut it to what i need?

[Unfortunate]

so the middle is 17'' long i just cut it to what i need?

exactly. ;)

[Unfortunate]

sorry for threadjack but using http://www.psp-inc.com/

Volume of Box in Cubic Feet is before or after displacements???

[icweiner]

isnt it better to have the ports as close together as possible and the sub as far away from the ports as possible?

[blackbonnie]

sorry for threadjack but using http://www.psp-inc.com/

Volume of Box in Cubic Feet is before or after displacements???


after

[tapout383]

isnt it better to have the ports as close together as possible and the sub as far away from the ports as possible?

good qestion anyone know answer of if it matters

[tapout383]

bump should the aeros be close or apart or does it matter?

[tapout383]

started build bump...where should the aeros be on the box?

[NewAgeKing]

Make sure to figure in the flare for the port. Looks like in the diagram you have the ports pretty close in the corners.

[skmfkr]

http://www.edesignaudio.com/product_info.php?cPath=1_76_101&products_id=758

cheapest place for 6" aeros

[shavenblazer]

No you want the sub as far away from the end of the port as you can.

[Unfortunate]

No you want the sub as far away from the end of the port as you can.

I think he was asking if the ports should be close together or far apart from eachother.

I don't think it matters as long as you have in this case 6" of space from all objects or as much as you can fit.

[SSS 18734]

isnt it better to have the ports as close together as possible and the sub as far away from the ports as possible?

nope

[tapout383]

thanks for all the answers yeah im going to make sure the flare is away from the wall ( i didnt design the box).

[tapout383]

http://www.edesignaudio.com/product_info.php?cPath=1_76_101&products_id=758

cheapest place for 6" aeros

and holy **** dude your the greatest hahaha

[tapout383]

so should I put the woofer n centee or closer to end box

[mazdakid]

put it farther away from the opening of the ports inside the box

[skmfkr]

2 ports on driver side facing back and sub on the passenger side facing up

[rickymac21]

make your own flares... use pvc pipe, a mold , and a heat gun... i did it and they work great. a lot cheaper than buying the stupid flares..

[tapout383]

make your own flares... use pvc pipe, a mold , and a heat gun... i did it and they work great. a lot cheaper than buying the stupid flares..

this may be a dumb qestions anyone know the cutout of a 6'' aero??