PDA

View Full Version : Whats the best way to install components?



jetmech727
03-15-2009, 07:11 PM
I've a pair of 5.25" components. Is it best to put the 5.25" and the tweeter together in a kick panel or is it better to just have the 5.25 in the kick panel and the tweeter up in the dash? Right now I just have 4x6 in the dash, so another option is to put the components together in a kick panel,and also use the 4x6, as the amp is stable at 2 ohm's stereo. Just looking for some advice.

Thanks

krisfnbz
03-17-2009, 04:40 PM
it depends on weather the speakers are on axis or off axis, and depends on what YOU like it to sound like. Your mid should go in your door though.

jetmech727
03-20-2009, 06:00 PM
it depends on weather the speakers are on axis or off axis, and depends on what YOU like it to sound like. Your mid should go in your door though.

They will be in kick panels. No room in the doors. Its an 87' Trans Am. There Clif Design 5.25 components, and the tweeter will not be exactly on axis due to were the kick panel is located.