PDA

View Full Version : Help needed: 5.25/6.5 Coaxials



funkmaster
03-09-2009, 10:19 AM
Im finishing up putting together a system for my car and would like some advice on coaxs. I will not go with components since this is a stealth install with no parts of the system being visible from outside the car excluding the HU.

I have speakers now, but am not really satisfied with how they sound. Looking for something highend, but since I havent bought any "new" car audio gear in a long time im not sure whats good and what isnt.

Here is the current setup:
Nakamichi CD-500 head unit
Precision power A200 (50wx2@4ohm)
Precision power A300 (75wx2@4ohm)
Precision power ProArt 50 (400wx2@2ohm bridged)
10" MMATS P3.0 DVC subwoofer
4ga power/ground to dist. blocks, 8ga direct to each amp.
Stinger RCA cables

My current speakers are:
Older 6.5" Infinity RS Coax (not sure on model) in the rear
Older 4" Infinity Kappa Coax (not sure on model) up front.

It is possible to squeeze a 5.25" up front, which is what im planning on doing, but mounting depth is an issue for both front and rear since its such a small car (1985 Honda CRX)

Thanks in advance.

C3 Customs
03-09-2009, 10:27 AM
Do you have a rough idea how much room you have (mounting depth)?

funkmaster
03-09-2009, 10:59 AM
right around 2" for front and rear. Perhaps a bit less than 2" in the front.

C3 Customs
03-12-2009, 09:35 AM
Any updates?